Selecting the Automatic Operating Mode
ENGLISH
You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed.
1 | If necessary, press the | (On/Off) button. | ||
| Result : | ◆ The OPERATION indicator on the indoor unit comes on. | ||
|
|
|
|
|
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2 | If the |
| is not displayed at the top of the remote control, |
| press the MODE button on the remote control one or more times until it | ||
| appears. |
|
|
| Result | : | ◆ The indoor unit beeps each time you press the MODE button. |
◆The air conditioner runs in AUTO mode.
Note You can change modes at any time.
3To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature.), press the TEMPERATURE buttons one or more times.
SET TEMP. | SET TEMP. | - | SET TEMP. | SET TEMP. |
Standard temperature | +1°C | +2°C | ||
< When you feel hot > |
| < When you feel chilly > | ||
Note Auto Change Over Function (Only the Inverter Models)
◆In the Automatic mode, the air conditioner selects one of COOL, HEAT, DRY depending on the indoor and outdoor temperatures. If the air conditioner has not been operated for an hour, the air conditioner will take the current temperatures again and it will restart operating in
the optimum mode.
E- 9