Lightolier SS 1 LAMP Photometry, Ordering Information, Options/Accessories, Specifications

SS Staggered Strip Surface Fluorescent SS 1 LAMP

Page 2 of 2

Photometry

REPORT NO: G89007

CATALOG NO: SS4S132HPF120SO

LAMP TYPE: 1F32 T8

LUMENS PER LAMP: 2850 TOTAL

EFFICIENCY: 89.5%

CIE TYPE: Semi-Direct

SPACING CRITERIA: 1.6

SHIELDING ANGLE: 180

4-1/4" Wide, 1-5/8" Deep, 24", 36", 48", 69", 93" Length, Individual or Tandem, 1 Lamp T8 or T12

Model No. SS4S132HPF120SO

coefficients of utilization — zonal cavity method					(effective floor cavity reflectance 0.20)
	RF		20			20			20
	RC		80			50			30
	RW	70	50	30	50	30	10	50	30	10
	1	89	84	79	71	68	64	64	61	58
ratio	2	80	71	64	60	55	51	54	50	46
	3	72	62	53	52	46	41	47	42	38
cavity	4	65	54	45	46	39	34	41	36	31
	5	59	47	39	40	34	28	36	30	26
room	6	54	42	33	36	29	24	32	26	22
	7	50	37	29	32	25	21	29	23	19
	8	46	33	25	29	22	18	26	20	16
	9	43	30	22	26	20	15	23	18	14
	10	40	27	20	24	18	13	21	16	12

Ordering Information

Explanation of Catalog Number. Example: SS4S132HPF120SOGLR†

SS 1 HPF

Staggered Strip:	Fixture Length:	Lamp Configuration:	Lamp Quantity
4-1/4" wide	2=24"	S=Standard
channel	3=36"	T= 3' or 4' Lamps
	4=48"	in Tandem
	6=69"	(for 6' or 8' Units)
	8=93"

†No Product Change. New Catalog Number Designation.

Options/Accessories

Fusing: Internal fast-blow fusing. Suffix: GLR.

Internal slow-blow fusing. Suffix: GMF.

Electrical Wiring Options: Consult factory.

Radio Interference Filter: 120 or 277 volt, 50 or 60 Hz. One per fixture.

Suffix: R. One per ballast. Suffix: B.

Stem and Canopy Sets: Suspends fixture 6', 12', 18' or 24' from surface.

Catalog Number: ASC6 CSP (6"), ASC12 CSP (12"), ASC18 CSP (18"),

ASC24 CSP (24").

Lamps:

(By Others)

17=17 watt (T8)

20=20 watt (T12) (Nominal 24")

25=25 watt (T8)

30=30 watt (T12) (Nominal 36")

32=32 watt (T8)

34=34 watt (T12) (Nominal 48")

(One lamp in tandem

for 69" and 93" fixtures)

Ballast Type:

HPF=High Power

Factor

Voltage:		Options:
120 or 277		Add appropriate
Ballast:		suffix to catalog
		no., ie: (GLR)
1 or 2 Lamp Mag. T12	LE
Standard Electro-
Magnetic (20 or	P
30 watts only)
	<20THD	<10THD
1 or 2 Lamp Elec. (T8)	SO*	HI*
LOL Dimming (T8)	PS	–

*Instant Start Standard

Other dimming options. Consult factory.

Specifications

Materials: Chassis parts are die formed heavy duty code gauge cold rolled steel.

Ballast cover–code gauge cold rolled steel, secured by plated quarter-turn latches.

Finish: Chassis exterior–baked white polyester enamel, minimum reflectance 86%.

Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2003 Genlyte Thomas Group LLC (Lightolier Division) A0303

Section3A/Folio H130-11