Samsung CN17VSSN/EDC manual Windows

Setting up Your LCD Monitor

Windows® 98

1	Windows® 98 will auto-detect your new monitor and start the “Add New Hardware
	Wizard” if the drivers are not already installed. Click the NEXT button to search for
	drivers.
2	Check the diskette (or CD-ROM) drive box to install the drivers off the diskette (or CD)
	provided with your monitor and click NEXT.
3	Confirm that Windows found the driver on the diskette (or CD) and click NEXT again
	to install the driver.

To manually install or update the driver, follow the directions below:

1	Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
	ADVANCED, MONITOR tab, CHANGE. This will start the “Add New Hardware

	Wizard”.
2	Follow the same directions as given in the steps in the section above.

Windows® 95

To determine the version of Windows® 95 that your computer uses, right click on the My Computer icon on the Windows desktop and select Properties. The version number can be seen on the General section under “System:”. Follow the directions given below according to the version of your Windows® 95 operating system:

Version 4.00.950A

1	Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
	CHANGE DISPLAY TYPE, CHANGE, HAVE DISK.
2	Type the diskette (or CD) letter in the box and click OK.
Version 4.00.950B
1	Click on START, SETTINGS, CONTROL PANEL, DISPLAY, ADVANCED
	PROPERTIES, MONITOR tab, HAVE DISK.
2	Type the diskette (or CD) letter in the box and click OK.

English 7

Italiano Portuguese Deutsch Español Français English