Installing batteries (Battery size: AAA)
Install two batteries so that the polarity of the batteries
✎✎ Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, see page 5.
✎✎ NOTE
•• Install the batteries so that the polarity of the batteries
•• Use the remote control within 7 m of the TV.
•• Bright light may affect the performance of the remote control. Avoid using when near fluorescent lights or neon signs.
•• The colour and shape may vary depending on the model.
Connecting to an Antenna or Cable Connection
✎✎ Plug the power cord into a wall outlet only after you have made all other connections.
✎✎ If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.
✎✎ Use caution when you move or swivel the TV if the antenna cable is tightly connected. You could break the antenna jack off the TV.
VHF/UHF Antenna
Cable
ANT OUT
Antenna Cable
(Not Supplied)
or
Power Input
✎✎ For the best cable connections to this product, be sure to use cables no thicker than 1.4 cm (14mm).
•• Maximum thickness - 1.4 cm (14mm)