Basic Features
¦¦ Adjusting Sound Settings
Equalizer
Adjusts the sound mode (standard sound mode only).
■■ Balance L/R: Adjusts the balance between the right and left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
■■ Reset: Resets the equalizer to its default settings.
¦¦ Sound Systems, Etc.
SPDIF Output
SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
■■ Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
✎✎ By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.
■■ Audio Delay: Correct
SRS TruSurround HD (Off / On) t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.
SRS TruDialog (Off / On) t
(standard sound mode only)
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
✎✎When Speaker Select is set to External Speaker. ✎✎When Speaker Select is set to TV Speaker.
✎✎If there is no video signal, both speakers will be mute.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
¦¦ Selecting the Sound Mode
When you set to Dual |
|
sound mode is displayed on the screen. | DUAL |
|
| Audio | Dual | Default | |
| Type | |||
|
|
| ||
A2 | Mono | Mono | Automatic | |
Stereo | Stereo Mono | change | ||
Stereo | ||||
Dual | Dual f Dual g | Dual f | ||
| ||||
| Mono | Mono | Automatic | |
NICAM | Stereo | Mono Stereo | change | |
Stereo | Dual | Mono Dual f | Dual f | |
| Dual g | |||
|
|
|
✎✎If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.