Slow Motion, NTSC/PAL Selection Method | Samsung Z530MH/UMG guide

Z-530M 10/17/02 2:21 PM Page 12

SLOW MOTION

Press the SLOW button on the remote control when the play function is on

-Voices do not come out when the
SLOW button is pressed	SLOW
-Slow playing is 1/2 of the normal
playing speed at 1st press.
-Slow playing is 1/4 of the normal
playing speed at 2nd press.

-Slow playing is 1/8 of the normal playing speed at 3rd press.

-Slow playing is canceled at 4th press.

-The sound is muted during the slow playing.

To return to normal operation

-Press the SELECT(PLAY/PAUSE) button.	SELECT

NTSC/PAL SELECTION METHOD

-Press the PAL/NTSC(REPEAT) button for 1 sec or longer on STOP Mode.

REPEAT

You can matching the picture display

on your TV.	PAL/NTSC

AI SLEEP FUNCTION

-Press AI SLEEP button, After playing state is finished, Automatically go to power off.

AI SLEEP

SELECT SOUND TO YOUR PREFERENCE

PREPARATION

1.Press the STANDBY/ON button. (The audio is set to the stereo mode automatically)

2.Insert a disc and press the PLAY button.

Press the SOUND SELECTOR button

-Every time you press this button, sound changes as show below

SOUND

(REMOTE CONTROL)

	Screen on your	Audio Output
	Screen on your
	TV monitor	L-ch	R-ch

1st press.	L-CH	L-signal	L-signal

2nd press.	R-CH	R-signal	R-signal

3rd press.	STEREO	L-signal	R-signal

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

◆You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

◆Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

◆CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)