Samsung Z530MH/ESN, Z530MH/UMG manual Trouble Shooting, Symptom

Page 23

Z-530M 10/17/02 2:21 PM Page 21

TROUBLE SHOOTING

SYMPTOM

CHECK AND ACTION

 

 

Tray is not ejected.

–Check if the power is turned on.

 

 

The unit does not play

–Check if a disc is loaded.

 

 

Tray is ejected.

–Check if a disc is contaminated or damaged.

 

Remove disc, clean it and insert again.

 

–Check if a disc is seated properly.

 

 

Video or audio is muted, or tray

–Check for condensation in unit.

is ejected after 2-5 seconds.

–Removed disc, leave the unit with the power turned

 

on for 1-2 hours. The unit will operate only after the

 

condensation is cleared.

 

 

Picture appears late when

–Repeated pressing of PLAY/STOP/OPEN caused disc

SELECT(PLAY/PAUSE) button is pressed.

drive motor to over heat, and protection circuit

 

activated until motor cools down.

 

 

Does not have video although

–Check if TV power is turned on.

disc is turned.

–Check if connection is secure.

 

–Check if the unit is bypassed.

 

 

Picture shakes vertically.

–Picture may shakes momentarily during transition

 

from dark to bright.

 

 

Picture quality of a particular disc

–Check if disc is damaged or deformed.

is poor and picture shakes

–Check if disc is contaminated.

 

 

SKIP or SEARCH takes too

–Some discs may require longer time to read encoded

much time.

information.

 

–Check disc.

 

 

TIME SEARCH searches

–Check if disc is contaminated or deformed.

different time.

–When picture shakes disc may be contaminated or

 

deformed causing malfunction. Clean disc

 

 

After pressing the SELECT(PLAY/PAUSE)

–If the PLAY/STOP/OPEN operations are repeated within short

button, there is a long delay before

period of time, the Disc Drive Motor overheats. The disc will not rotate until

picture appears on screen.

the motor cools down. This is a normal condition. Wait a few minutes for

 

the motor to cool down.

 

 

The disc rotates well, but you do not

–Check if the TV power is turn ON.

have picture on the screen, You can see

–Check if the connection is good.

the picture on screen, but the quality is

–Check if the disc is in good condition.

poor and the picture shakes.

 

 

 

No sound

–Check if disc is loaded upside down.

 

–Insert disc with label side up.

 

–Check if disc is severely deformed. Clean the disc

 

 

21

Image 23
Contents 530M 10/17/02 221 PM Case the need for Servicing arises Owners Instructions Class Laser Product Safety PrecautionsSafety Instructions Contents Safety Instructions Outdoor Antenna Grounding Front Panel Controls and ComponentsRear Panel Remote ControlCompartment cover Remote ControlOpen the battery Install two AAA batteries To Insert BatteriesVCD and CDP + TV + Amplifier System ConnectionsVCD and CDP + TV To Return to the Previous Menu What is MP3?MP3-DISC Playback 5Select a number from the menu and press it HOW to Playback VIDEO-CD versionSelect Sound to Your Preference Slow MotionNTSC/PAL Selection Method AI Sleep FunctionTrack View Disc View FunctionTo Repeat ONE Disc Repeat FunctionIndex View To Repeat ONE TrackProgram Function Zoom Function This function works only in the VCD play modeSkip Searching FunctionsHigh Speed Search Last Memory Function Time SearchPress the Select button KEY Control Function Karaoke FunctionTurn on the TV Load and play a disc Connect the MIC 3Use the microphoneAdjust the Digital Echo To decrease or increase the volume of the MicrophoneSymptom Trouble ShootingCare of Discs General Information about the DiscHandling Discs SpecificationsCare of Disc
Related manuals
Manual 24 pages 61.64 Kb