Connecting
the Video Out to TV
Make sure that turn off and disconnect the plug from outlet before moving or installing the product. In connecting to video, select one of following three methods that suits for TV and connect it.
P.SCAN
(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of infor- mation (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
IMPEDANCE SUBWOOFER : 4Ω
FRONT / CENTER / REAR : 4Ω
CENTER | REAR | FRONT |
| L | L |
SUBWOOFER REAR | FRONT | |
| R | R |
|
| METHOD 3 | |
|
| METHOD 2 | |
METHOD 1 |
|
| |
TV |
|
| |
VIDEO | COMPONENT | ||
IN | IN | ||
|
Press and hold P.SCAN button on the remote controller for over 5 seconds in
stop mode. |
| CONNECTIONS | |
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" | |||
| |||
repetitively. |
|
| |
What is Progressive (or |
| ||
Interlaced Scan (1 FRAME = 2 FIELDS) | Progressive Scan (FULL FRAME) |
| |
METHOD 1 Composite Video ............... Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the sys- tem to the VIDEO IN jack on your television.
METHOD 2 S-Video ............... Better Quality
If you television is equipped with an
METHOD 3 Component (Progressive Scan) Video ............... Best Quality
If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the cor- responding jacks on your television.
Note | • When the Progressive scan mode is selected, the VIDEO and |
do not feed any signal. See page 14 to select Progressive Scan.
In | The progressive scanning method scans one full frame of |
laced fields (odd and even), where each field contains | video consecutively down the screen, line by line. |
every other horizontal line in the frame. | An entire image is drawn at one time, as opposed to the |
The odd field of alternating lines is displayed first, and | interlaced scanning process by which a video image is |
then the even field is displayed to fill in the alternating | drawn in a series of passes. |
gaps left by the odd field to form a single frame. | The progressive scanning method is desirable for dealing |
One frame, displayed every 1/30th of a second, contains | with moving objects. |
two interfaced fields, thus a total of 60 fields are dis- |
|
played every 1/60th of a second. |
|
The interlaced scanning method is intended for capturing |
|
a still object. |
|
Note | • | This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support |
|
| Progressive Video. (It does not work on TVs with conventional component inputs, i.e., |
|
| scan TVs.) |
•Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
•"NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
•Each country has a different video format standard.
•For normal playback, the video format of the disc must be the same as the video format of your TV.
13 | 14 |