Setting the Environment
ENCODE BIT RATE
SOUND CONTROL
Select SOUND in ENVIRONMENT.
WOW LEVEL
●Use the 
,
buttons to set the desired MP3 encoding bit rate.
●You can set the desired bit rate to 64kbps, 96kbps or 128kbps when doing MP3 encoding.
ENCODE BIT RATE
96 kbps
●The levels of SRS and TRUBASS can be adjusted.
●Use the 
, 
buttons to select the level you want.
●The level for SRS and TRUBASS can each be set within the range of 0 to 10.
SRS LEVEL
8 Level
TRUBASS LEVEL
8 Level
BEEP ON/OFF
●Use the 
, 
buttons to set the BEEP mode.
●BEEP ON : A beep sounds each time a button is pressed.
●BEEP OFF : No beep sounds when a button is pressed.
BEEP ON/OFF
ON
OFF
●If OPTIMIZATION is selected, the SRS function is optimized to the connected device.
●Set the desired device to earphone, headphone, speaker or carpack (car cassette adapter)
by using the 
, 
buttons.
OPTIMIZATION
EARPHONE
HEADPHONE
CARPACK
DEFAULT VOLUME
●Use the 
, 
buttons to set the DEFAULT VOLUME.
●It is possible to set the default volume to a value between 0 and 40. If the power is turned on again after having adjusted the volume above the default value, music is played at the default volume.
●If the power is turned on again after the volume was set to within the default value, the music is replayed at the previously played volume.
DEFAULT VOLUME
22
52 |
| 53 |
|
|
|