Connections
Connecting the Speakers
Speaker Components
(L) (R)
FRONT
(L) (R)
REAR
SCREW (5x15): 4EA
SCREW (4x20): 16EA | CENTRE SPEAKER |
STAND
CENTRE
STANDBASE | SUBWOOFER | FRONT/REAR SPEAKER | SUBWOOFER |
|
| ||
| SPEAKERCABLE |
|
|
Installing the Speakers on the Tallboy Stand
1.Turn the Stand Base upside-down and connect it to the Stand.
2.Insert small screws (4*20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.
!CAUTION : When you use a torque screwdriver, be careful not to put exces- sive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm
3.Connect the upper Speaker to the assembled Stand.
4.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.
5.This is the appearance after the speaker is installed. Follow this steps to install other speaker.
1 |
|
| Stand |
| Base |
| Stand |
3 | Speaker |
|
Stand
5