Ideal Centre
Speaker placement
Ideal Rear
Speaker placement
Place all speakers within this circle.
Df: The distance from Front Speaker
Dc: The distance from Centre Speaker
Dr: The distance from Rear Speaker
Setting the Centre Speaker
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance |
|
|
|
|
|
| |
between | 0.00m | 0.34m | 0.68m | 1.06m | 1.40m | 1.76m | |
Df and Dc |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Delay | 00 ms | 01 ms | 02 ms | 03 ms | 04 ms | 05 ms | |
Time | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
Setting the Rear Speaker
If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance |
|
|
|
|
|
| |
between | 0.00m | 1.06m | 2.11m | 3.16m | 3.62m | 5.29m | |
Dr and Dc |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Delay | 00 ms | 03 ms | 06 ms | 09 ms | 12 ms | 15 ms | |
Time | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
✎NOTE
`With 
PL II (Dolby Pro Logic II), the delay time may be different for each mode.
`With
`The Centre channel is only adjustable on 5.1 channel discs.
| 03 |
Test Tone | Setup |
|
Settings |
|
|
Speaker Setting |
|
|
Speaker Size |
|
|
Sound Edit |
|
|
Delay Time |
|
|
Test Tone | : On | ▶ |
Select | Return | |
Move | Select | Return |
Use the Test Tone feature to check the speaker connections.
~Press the _+ buttons to select ON.
~The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Rear Right ➞ Rear Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
~You can select either off, 2/8, 4/8, 6/8, Full
AV-SYNC
Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video
~You can set the audio delay time between 0 mSec and 300 mSec. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled On/Off.
~On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
~Off : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.