Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an audio CD
1. During playback, use the ► button to select in the lower right corner of the screen,
and then press the v button.
2. Use the ▲▼ to select the repeat mode you want - Off, One Song, or All - and then press the v button.
AllShare Play / Music / | Audio CD |
|
| 1/14 |
|
|
| ||
TRACK 001 | 02:38 |
|
|
|
TRACK 002 | 03:17 |
|
|
|
TRACK 003 | 05:21 |
|
|
|
TRACK 004 | 05:34 |
|
|
|
TRACK 005 | 02:54 | TRACK 001 |
|
|
TRACK 006 | 03:44 |
|
| |
TRACK 007 | 04:07 |
|
|
|
TRACK 008 | 03:42 |
| 00:03 / 02:38 | |
TRACK 009 | 03:15 |
| ||
TRACK 010 | 03:16 |
|
|
|
|
| bcPage Move | /Tools | 'Return |
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio CD
1.During playback, use the ► button to select
in the lower right corner of the screen, and then press the v button.
2.Use the ▲▼ to set the Shuffle mode On or Off, and then press the v button.
Creating a Playlist from a CD
1.With the Playback screen displayed, press the TOOLS button. The Tools menu appears.
2.Use the ▲▼ buttons to select Play selection, and then press the v button. The Play selection screen appears.
3.Use the ▲▼ buttons to select a track, and then press the v button. A check appears to the left of the track.
4.Repeat Step 3 to select and check additional tracks.
5.To remove a track from the list, move to the track, and then press the v button again. The check on the track is removed.
6.When done, press the ► button to select Play, and then press the v button. The Music Playback screen reappears listing only the tracks you checked. The selected tracks play automatically.
NOTE
\\ You can create a playlist with up to 99 tracks on Audio CDs
\\ If you have created a playlist, Play selection is replaced by Edit playlist on the Tools menu.
\\ On the Play selection screen, you can also choose Select All, Deselect All, and Cancel.
on your remote or select 6button, and then press the vbutton. If you do not use Select All or select individual tracks, the Playlist will not change.
Ripping
1.Insert a USB device into the USB jack on the rear of the product.
2.With the Playback screen displayed, press the TOOLS button. The Tools menu appears.
3.Use the ▲▼ buttons to select Rip, and then press the v button. The Rip screen appears.
4.Use the ▲▼ buttons to select a track, and then press the v button. A check appears to the left of the track.
5.Repeat Step 3 to select and check additional tracks.