Samsung BD-P1600A/UMG COnnECTing to a TV WiTH DVi CaBLE Best QUaLiTY,  connections, Audio Cable

connections

COnnECTing TO a TV WiTH DVi CaBLE (BEST QUaLiTY)

1.Using an HDMI-DVI cable (not included), connect the HDMi OUT terminal on the rear of the Blu-ray Disc Player to the DVi in terminal of your TV.

2.Using the audio cables, connect the aUDiO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the aUDiO (red and white) in terminals of your TV.

Turn on the Blu-ray Disc Player and TV.

3.Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on your TV screen.

•If you have set the remote control to operate your TV (see pages 20~21), press the TV SOUrCE button on the remote control and select HDMI as the external source of the TV.

Connecting the HDMI cable while the Blu-ray Disc Player’s power is on will result in the player’s video output being changed to HDMI mode automatically (see page 43).

M	 Depending on your TV, certain HDMI output resolutions may not work.
	Please refer to the user's manual of your TV.
	 If an HDMI-DVI cable is plugged into the TV, the Blu-ray Disc Player’s output resolution is set to HDMI
	automatically within 10 seconds.
	 If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 43)
	 When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI
	output resolution will automatically be set to the highest provided by the TV
	 If the HDMI cable is connected or removed during playback of a CD-DA, the player will stop playing.

Audio Cable

HDMI-DVI cable (not included)

Red White

2_ connections