Samsung BD-J5500/UM manual Connections, Tour of the Remote Control, Connecting to a TV

Remote Control

Tour of the Remote Control

Connections

Connecting to a TV

Turn the player on and off.

Press to open and close the disc tray.

Press numeric buttons to operate options.

Use to enter the disc menu. Press to skip backwards or forwards.

Press to stop a disc. Press to play a disc.

Use to access various audio functions on a disc (Blu-ray Disc/DVD).

Press to use Tools menu.

Use to select menu items and change menu values.

Return to the previous menu.

These buttons are used both for menus on the player and also several Blu-ray Disc functions.

Press to use Bonusview function. Allows you to repeat A-B disc.

AUDIO HOME SUBTITLE

BONUS	REPEAT REPEAT	FULL
VIEW	A-B	SCREEN

Turn the TV on and off.

After setup, allows you to set the input source on your TV.

TV volume adjustment.

Use to enter the popup menu/title menu.

Press to search a disc backwards or forwards.

Press to pause a disc.

Press to move to the home menu. Press to switch the Blu-ray Disc/DVD's subtitle language.

Use to display the playback information.

Press to exit the menu.

Press to see the full screen on a TV. During Blu-ray or DVD disc playback, the Full screen button does not operate. Allows you to repeat a title, chapter, track or disc.

Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

-- Do not connect the power cord to the wall outlet until you have made all the other connections.

-- When you change the connections, turn off all devices before you start.

Audio

Video

✎✎ NOTES

ƒƒ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player to an audio system to hear audio.

Installing batteries

✎✎ NOTES

ƒƒ If the remote does not operate properly:

•Check if the batteries are drained.

•Check if the remote sensor is blocked by obstacles.

•Check if there is any fluorescent lighting nearby.

!! CAUTION

ƒƒ Dispose of batteries according to local environmental regulations. Do not put them in the household trash

ƒƒ Do not dispose of batteries in a fire.

ƒƒ Do not short circuit, disassemble or overheat the batteries. ƒƒ Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

ƒƒ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

ƒƒ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

ƒƒ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

ƒƒ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

ƒƒ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable. ƒƒ HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

8

• Check the polarity (+/–) of the batteries.