Samsung BD-J5500/UM manual Connecting to an Audio System, Wired Network

Connecting to an Audio System Connecting to a Network Router

You can connect the Blu-ray player to an audio system using one of the methods illustrated below.

-- Do not connect the power cord to the wall outlet until you have made all the other connections.

-- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI compatible AV receiver

~~ Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver.

~~ Best quality (Recommended)

Method 2 Connecting to an AV receiver with a Digital Coaxial Cable

~~ Using a digital Coaxial cable (Not supplied), connect the Coaxial Digital Audio Out jack on the product to the Digital Coaxial In jack of the receiver.

~~ Good quality

~~ You will hear sound only through the front two speakers with Digital Output set to PCM.

Method	1	Method	2
Audio		Audio

You can connect your player to your network router using one of the methods illustrated below.

To use the DLNA network functionality, you must connect your PC to your network as shown in the illustration.

Wired Network

Broadband modem

(with integrated router)

	Broadband
Or	service

Router

Broadband service

Broadband

modem

✎✎ NOTES

ƒƒ Internet access to Samsung's software update server may not be allowed, depending on the router you use or your ISP's policy. For more information, contact your ISP (Internet Service Provider).

ƒƒ DSL users, please use a router to make a network connection.

9