Transition Networks SISTF10xx-141-LR(T) installation manual Wall mounting

Page 18

Transition Networks

SISTF10xx-141-LR(T) Industrial Unmanaged Switch

Wall mounting

Wall mount

The Industrial Switch includes a wall mount bracket and screws in the contents of the shipping

bracket

package. The wall mount bracket can be attached to the rear panel of the Industrial Switch to

 

enable mounting to a vertical surface such as the wall of an enclosure. Locate the bracket (1)

 

and screws (6) and follow the steps below to install the bracket on the Industrial Switch.

 

 

Wall mount

To install the wall mount bracket to the Industrial Switch, see Figure 6 and do the following:

bracket install

 

 

Step

 

Action

 

 

 

1.

 

Remove existing screws (3) and DIN-Rail bracket from rear of Industrial Switch.

 

 

2.

 

Locate wall mount bracket and screws (6) from Industrial Switch packaging.

 

 

3.

 

Place bracket in correct orientation as shown and insert and tighten screws to

 

 

 

 

secure bracket to rear of Industrial Switch.

 

 

4.

 

Mount assembled device to a wall per locally accepted practices for anchoring

 

 

 

 

and securing. (Wall mount screws not included.)

Locate wall mount

2

 

3

Screw bracket onto rear

 

of Industrial Switch

brackets and screws

 

 

 

 

 

 

 

 

 

1

Remove screws and

DIN rail bracket

 

Figure 6: Installing wall mount bracket to Industrial Switch

10

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Installation Manual SISTF10xx-141-LRTPage Table of Contents Transition Networks SISTF10xx-141-LRT Trademark, copyright, and product classification information About this product and manual IIIOn next Transition Networks Section SISTF10xx-141 Industrial Unmanaged Switch General description OverviewSISTF10xx-141 Industrial Unmanaged Switch part numbers Package contents SISTF10xx-141-LRT Industrial Switch Front View Physical descriptionPhysical description Section Installation DIN rail mounting DIN rail mounting Wall mounting Wall mountGrounding the Industrial Switch Connecting power to the Industrial Switch Connecting power to the Industrial Switch Connecting power to the Industrial Switch Barrel Connector Interface Cable Connecting fiber cables Connecting copper cables DIP Switches OFFLight Emitting Diodes LEDs LNK/ACTSection Advanced Features Advanced Features Straight-Through and Crossover CablesSection Cable Specifications Copper RJ-45 cable specifications Fiber cable and optic specifications Troubleshooting SectionTroubleshooting problem and corrective action table Section Contact Us, Warranty Compliance Information Contact us Warranty Warranty Compliance information CuationFound in the ‘Contact Us’ portion of this document Appendix a Technical Specifications SISTF10xx-141-LRT specifications, notices, and warningsSISTF10xx-141-LRT specifications, notices, and warnings

SISTF10xx-141-LR(T) specifications

Transition Networks has long been recognized as a leader in network connectivity solutions, and one of their prominent products is the SISTF10xx-141-LR(T) series. This series of media converters is designed to provide flexible and reliable solutions for converting Ethernet signals over fiber optic connections, significantly enhancing network performance in various environments.

The SISTF10xx-141-LR(T) series serves as a robust interface between copper-based Ethernet systems and fiber optic networks. One of the main features of this product line is its support for high-speed data transmission, capable of handling 10/100/1000 Mbps Ethernet signals. This versatility allows organizations to easily transition from traditional copper infrastructure to optical fiber without the need for extensive reconfiguration of their existing systems.

The SISTF10xx-141-LR(T) is equipped with long-range capabilities, supporting distances of up to 10 kilometers over single-mode fiber optic cables. This makes it an ideal choice for organizations that require extended reach, such as in campus environments or across multiple buildings. The LR designation signifies its suitability for long-range applications, ensuring that data can be transmitted reliably over greater distances with minimal signal degradation.

Incorporating advanced technologies, the SISTF10xx-141-LR(T) features auto-negotiation capabilities, which automatically detect the link speed and duplex mode of connected devices. This ensures optimal performance and compatibility with various networking equipment, simplifying installation and operation. Additionally, these media converters support a wide range of electrical standards, making them suitable for integration into diverse network architectures.

Security is a key consideration for many organizations, and the SISTF10xx-141-LR(T) addresses this by providing features such as link loss forwarding, which helps detect and respond to interruptions in the fiber connection promptly. This enhances overall network reliability, minimizing downtime and maintaining connectivity for critical applications.

The SISTF10xx-141-LR(T) is compact and designed for easy installation in both rack-mount and standalone configurations. Its rugged design ensures durability in various operating conditions, making it ideal for deployment in industrial settings or other challenging environments.

In conclusion, Transition Networks' SISTF10xx-141-LR(T) series of media converters stand out for their combination of high-speed performance, long-range capabilities, advanced technologies, and robust design. These features make it a valuable solution for organizations looking to enhance their network infrastructure while ensuring reliability and security in data transmission. As businesses continue to evolve in today’s digital landscape, the SISTF10xx-141-LR(T) remains a versatile choice for effective network connectivity.
Top Page Image Contents