Transition Networks SISTF10xx-141-LR(T) specs

SISTF10xx-141-LR(T) Industrial Unmanaged Switch

Transition Networks

Connecting power to the Industrial Switch, continued

Barrel connector A barrel connector interface cable is included with the Industrial Switch and can be used to

interface cable convert the barrel connector output of an external AC/DC power supply over to a wire interface that can then be inserted into the terminal block following the instructions and figure 9, both located on page 13 of this manual.

Note: An external AC/DC power supply is not included with the Industrial Switch. Transition Networks offers an accessory power supply that can be purchased separately, if required. Please see optional accessories in the general information section of this manual for ordering information.

CAUTION

The operating temperature of the Industrial Switch, when used in conjunction with an AC/DC power supply will be limited to the lesser operating temperature range of either device.

For example: SISTF10xx-141-LRT (-40ºC to +75ºC operating temp) used with SPS-UA12DHT-xx (-25ºC to +70ºC operating temp)

Operating temp for combination is -25ºC to +70ºC

Step	Action
1.	Locate the barrel interface cable included in the Industrial Switch packaging.
2.	Strip the power wires as required.
3.	Insert one stripped power wire into the terminal block plug, Observe polarity. See
	Figure 9 on page 13.
4.	Secure the wire using a flathead screwdriver by tightening the contact screw.
	See Figure 9 on page 13.
5.	Repeat Steps 3 and 4 until all wires are installed and secured.
6.	Locate an external AC/DC power supply with barrel connector interface and
	make sure the power supply is not plugged into any power source.
7.	Insert barrel connector into the receptacle on the interface cable. See Figure 11.

External AC/DC power supply with barrel connector

Barrel Connector

Interface Cable

Figure 11: Barrel Connector Interface Cable with external power supply

Step

Action

8.Plug external AC/DC power supply into an external power source.

9.Turn ON or plug in the external power supply and the PWR LED should turn ON along with PWR 1 LED and/or PWR 2 LED, depending on whether one or both power supplies are connected and turned ON.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

SISTF10xx-141-LR(T) specifications

Transition Networks has long been recognized as a leader in network connectivity solutions, and one of their prominent products is the SISTF10xx-141-LR(T) series. This series of media converters is designed to provide flexible and reliable solutions for converting Ethernet signals over fiber optic connections, significantly enhancing network performance in various environments.

The SISTF10xx-141-LR(T) series serves as a robust interface between copper-based Ethernet systems and fiber optic networks. One of the main features of this product line is its support for high-speed data transmission, capable of handling 10/100/1000 Mbps Ethernet signals. This versatility allows organizations to easily transition from traditional copper infrastructure to optical fiber without the need for extensive reconfiguration of their existing systems.

The SISTF10xx-141-LR(T) is equipped with long-range capabilities, supporting distances of up to 10 kilometers over single-mode fiber optic cables. This makes it an ideal choice for organizations that require extended reach, such as in campus environments or across multiple buildings. The LR designation signifies its suitability for long-range applications, ensuring that data can be transmitted reliably over greater distances with minimal signal degradation.

Incorporating advanced technologies, the SISTF10xx-141-LR(T) features auto-negotiation capabilities, which automatically detect the link speed and duplex mode of connected devices. This ensures optimal performance and compatibility with various networking equipment, simplifying installation and operation. Additionally, these media converters support a wide range of electrical standards, making them suitable for integration into diverse network architectures.

Security is a key consideration for many organizations, and the SISTF10xx-141-LR(T) addresses this by providing features such as link loss forwarding, which helps detect and respond to interruptions in the fiber connection promptly. This enhances overall network reliability, minimizing downtime and maintaining connectivity for critical applications.

The SISTF10xx-141-LR(T) is compact and designed for easy installation in both rack-mount and standalone configurations. Its rugged design ensures durability in various operating conditions, making it ideal for deployment in industrial settings or other challenging environments.

In conclusion, Transition Networks' SISTF10xx-141-LR(T) series of media converters stand out for their combination of high-speed performance, long-range capabilities, advanced technologies, and robust design. These features make it a valuable solution for organizations looking to enhance their network infrastructure while ensuring reliability and security in data transmission. As businesses continue to evolve in today’s digital landscape, the SISTF10xx-141-LR(T) remains a versatile choice for effective network connectivity.