Selecting the Fan Mode
You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode.
1If necessary, press the 
(On/Off) button.
Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.
2 Press the | button on the remote control until | is displayed. | |
Result: | The indoor unit beeps each time you press the | button. | |
| The air conditioner runs in the Fan mode. |
| |
| The temperature is set automatically. |
|
|
Note You can change modes at any time.
3 Press the | button to select the fan speed until the required setting | |
is displayed. |
| |
| Low |
|
| Medium |
|
| High |
|
Result: | Each time you press the | button, the indoor unit beeps. |
4To control the airflow direction, refer to page 15.