Samsung WD1142XVM/YL manual Using DRY Course

USING DRY COURSE

Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line for the dried clothes of 7.0kg.

1.Open the door, put in the clothes and close the door again.

2.Press the Power button and then press the Drying button. : The standard course will be selected automatically.

Drying is not available for Eco Drum Clean, Air Wash and Wool courses.

3.Select Drying button as follows. Drying Programs

•Every press of this button will select drying type repeatedly in the following order: Cupboard  Iron  Small Load  Low Temp.  Time (30 min.  1:00 h  1:30 h  2:00 h  2:30 h)  Cupboard

Drying Type		Information	Max	Time	Time
			Load	(Max Load)	(Soft Keep)
Auto	Cupboard	Standard: Dries the laundry.	7.0 kg	340 min	31 min
Drying
	Iron	For leaving items partially damp	7.0 kg	170 min	31 min
		so that it can be easily ironed.
	Small Load	Dries 3~4 towels or 2 shirts.	-	40 min	0 min
	Low Temp.	Dries the laundry at a Low Temp.
		to protect the texture of the	7.0 kg	310 min	31 min
		laundry.
Time Drying		You can select the appropriate		30/60/90/
		drying time depending on the	-		0 min
				120/150 min
		texture, quantity, and moisture.

•It automatically displays Drying Time by sensing the weight of clothes before drying for increasing the drying effect.

• For any loads of laundry, you can use the Auto Dry function. If you find that the laundry is not completely dried, use the Time Dry function additionally.

•If both the spin and drying cycles are selected, the spin speed is automatically selected to enhance the drying effi ciency.

•When using the drying cycle, check if the water supply valve is opened.

•Soft Keep function is to prevent laundry from being wrinkled when the laundry is not immediately removed after drying.

•While the Soft Keep function is running, “END” is displayed waiting for you remove the laundry.

4.Press Start/Pause button.

:It automatically performs an optimal function from washing to drying.

•The selected course can’t be altered after the start of drying.

•If cold water is not supplied, drying will not be performed.

•If you select Dry only, Spin is automatically selected as well to improve the drying performance (except the Time Dry option) If you don’t want the Spin operation, please manually unselect Spin by pressing the Spin button.

WASHING A LOAD OF LAUNDRY

English-29

YUKON-03073K-08_EN.indd Sec5:29 4/7/2016 11:22:45 PM