Samsung WF8140NYG/YL manual Using the Control Panel

washing a load of laundry

USING THE CONTROL PANEL

1 7 2 3 4 5 6 7 8 9 10

1DIGITAL GRAPHIC Displays the remaining wash cycle time, all cycle information, and error

DISPLAYmessages.

		Pressing the button cycles through the following options: Main  Main +
		Pre  Main + Soak  Main + E-Save  Cancel.
		E-Save - This option reduces the power consumption.
		Soak - This washes laundry using the soak function.
		If the Soak function is selected, the drum rotates for 1 minute and then
		stops for 4 minutes (the soak operation) before the wash operation is
2	FUNCTION	started.
		You cannot select the Soak function for the Quick Wash, Wool, Delicate,
	SELECTION BUTTON
		and Clean Tub courses.
		Pre-wash - Press this button to select pre-wash. Pre-wash means a
		preliminary wash that is performed for 10 minutes before the main wash.
		Pre-wash is effective for highly soiled laundry.
		Pre-wash is only available for: Cotton, Heary Soil, Boil, Towels, Blanket
		and Calm Wash.
		Main - This option is used to wash normal laundry.
3	TEMPERATURE	Press this button repeatedly to cycle through the available water
		temperature options:
	SELECTION BUTTON
		(Cold Water, 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
		Press this button repeatedly to cycle through the available Delay End
4	DELAY END	options (max 24 hours in one hour increments).
	SELECTION BUTTON The hour displayed indicates the time when the wash cycle will be

finished.

5RINSE SELECTION Press this button to add additional rinse cycles. The maximum number

BUTTONof rinse cycles is five.

		Press the button repeatedly to cycle through the available speeds for the
6	SPIN SELECTION	spin cycle.
	BUTTON	“No spin ” - The laundry remains in the drum and no spin cycle is

performed after the final drain.

18_ washing a load of laundry

WF8140NYG-02626A_EN.indd 18

2008-06-09 ø¿»ƒ 12:01:20