Stop&Add
When the washing machine is working, the door is locked, and the “Stop&Add” lamp is off, you will not be able to add laundry. You can only add laundry when the Stop&Add lamp is illuminated.
1.Press the Stop&Add button.
The washing machine will automatically pause.
2.Wait about 30 seconds and check the state of “Stop&Add” lamp.
•Blinking: The water in the washing machine is drained down to the safety level for the additional laundry to be added.
•Off: Adding laundry is possible.
3.Add the laundry.
4.Press the Start/Pause button.
• Avoid adding laundry when the machine has foamed up or is filled with water. Otherwise, the foam or water may leak from the door. Check before opening the door.
•We recommend that you select the Stop&Add function 5 minutes before a cycle is performed.
•If the internal temperature is higher than 55 ˚C during the wash cycle or 70 ˚C during the drying cycle, the Stop&Add function cannot be selected.
• Do not open the door by force as it may result in injury or damage the washer.
WARNING
washing a load of laundry _21
02 WASHING A LOAD OF LAUNDRY
