Samsung WT40J8BNC1/YL, WT50J8BFC/YL, WT40J8BFC1/YL manual Spinning dry, Rinsing, Washing procedure

-- Lay the drain hose(A) down toward a sinkhole. (Without pump)

-- Place the drain hose(A) in sink or bath about

70~80cm above the ground. (With pump)

70~80cm

2.Set the WASH SELECTOR KNOB to the desired mode.

3.Set the CYCLE SELECTOR KNOB to ‘WASH. RINSE’.

Without pump
	With pump

4.Set the WATER SELECTOR KNOB to WASH.

5.Load laundry in the wash

tub.

6.Fill water in the wash tub and add the detergent.

7.Set the WASH TIME 1-15

minutes.

8.After washing,set the CYCLE SELECTOR KNOB to ‘DRAIN’

for drain.

Spinning dry

1.Transfer the clothes into the spin basket and arrange the clothes evenly.

	Bottom of balancer
	safety cover
2.	Be sure to attach the	Inner lid
	safety cover and close the
	inner lid.	Safety cover
3.	Close the spin dryer lid.

4. Set the AIR TURBO SPIN TIMER 1-10 minutes.

5.Incomplete spining.(Severe vibration or unbalance) See “When you load ...”on page 6.

Rinsing

1.Set the CYCLE SELECTOR KNOB to ‘WASH RINSE’.

Without pump
	With pump

2.Supply the proper amount of water as not to overflow the top of the washing tub.

3.Set the WASH TIMER 2~3

minutes.

4. Drain the water.Set the CYCLE SELECTOR KNOB to ‘DRAIN’.

5.Repeat this cycle until drain water is clean. (2~3 cycles)

washing procedure   _5

WT40J8BNC1-02750K-04_EN.indd 5

2013-05-23 �� 5:25:37