Installing Your Microwave Oven |
| Setting the Time |
EN Place the oven on a flat level surface 85cm above the floor. The surface should be strong enough to safety bear the weight of the oven.
20cm | 10cm | 1. | When you install your oven, make sure there is adequate |
above | behind |
| ventilation for your oven by leaving at least 10 cm (4 |
|
|
| |
|
|
| inches) of space behind and, on the sides of the oven and |
85 cm | 10cm on |
| 20 cm (8 inches) of space above. |
the side |
|
| |
of the floor |
|
| |
|
|
|
2.Remove all packing materials inside the oven. Install the roller ring and turntable.
Check that the turntable rotates freely.
3.This microwave oven has to be positioned so that plug is accessible.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
For your personal safety, plug the cable into a
damaged, it must be replaced by a special cable.
Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.
Your microwave oven has an inbuilt clock. The time can be displayed in either the
•When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer or winter time.
1. To display the time in | Then press the Clock |
the... | button... |
Once | |
Twice |
2.Press the ( 
) and ( ) buttons.
3.Press the Clock button.
4. Press the ( 
) and ( ) buttons to set the minute.
5.When the right time is displayed, press the Clock button to start the clock.
Result: The time is displayed whenever you are not using the microwave oven.
6