Cable connection | Samsung SOC-C120P/K, SOC-B120P/K manual

✔Notes on installation and usage

1.Users should not disassemble the camera from the front direction.

E2. Always handle the camera with care. Please do not apply a shock or vibration as much as possible and take cautions not to cause damage or make a scratch on the camera due to careless storage.

3.Please do not install the camera with the rainy place or highly humid areas. And do not operate the camera in the wet place.

4.Do not clean the camera body with the strong abrasives or soaps. When the camera becomes dirty, clean it with the dry rugs. Especially, make sure to use the dedicated rugs for lens to clean the dome cover.

5.Please select the camera in the cool area that is not exposed to the direct sunlight. If you do, it can cause bad effects on the product.

✔Cable connection

Caution to install SOC-B120P/SOC-C120P out- doors

• SOC-B120P/SOC-C120P is designed to be protected E from the water drops which are falling on the upper side of camera in a range of 15°.

(Dust-water protection level : IP42) Therefore, be sure to install it in a location which is fit in above condition when you install it outdoor.

SOC-B120P/SOC-C120P camera can be attached to the wall,ceiling or shelf using the camera mount bracket (SBR-110).

•Choose an installation site that can sufficiently support the weight of the equipments to be installed.

•Attach the camera mount bracket to the wall or ceiling using the supplied three screws (M4 X L15).

•Adjust the camera to target the video location and tighten the bracket handle on the camera mount bracket.