SHUTTER
EThe SHUTTER menu sets up the high speed electronic shutter, AUTO
low speed shutter. The high speed electronic shutter covers 7 shutter speeds from 1/100 to 1/10K seconds and is commonly used for imaging
fast moving objects. Both the low speed shutter cover 10 shutter speeds from x2 to x160, which slows the shutter speed to make clearer and brighter the screen images taken in dark illumination. If you want to slow the shutter speed automatically depending on the degree of darkness by sensing the intensity of radiation, please select the AUTO low speed.
| CAMERA ID | ON... |
| IRIS | DC... |
| BLC/WDR | OFF |
| COLOR/BW | AUTO... |
| SHUTTER | OFF |
| AGC | - - - |
| WHITE BAL | ATW |
| SYNC | INT |
| SPECIAL | ... |
| EXIT | QUIT |
|
|
|
If you keep pressing the LEFT or RIGHT key, the following speeds appear in sequence.
OFF | → AUTO X2 | → AUTO X4 | → AUTO X6 | → AUTO X8 | → AUTO X12 → AUTO X16 | → AUTO |
X20 | → AUTO X40 | → AUTO X80 | → AUTO X160 | → OFF | → 1/100(NTSC), 1/20(PAL) | → 1/250 → |
1/500 → 1/1000 → 1/2000 → 1/4000 → 1/10K → OFF |
|
| ||||
❖While the IRIS mode is in ELC or the BLC/WDR mode is WDR, you may
use the following modes only.
OFF | → AUTO X2 | → AUTO X4 | → AUTO X6 | → AUTO X8 → AUTO X12 → AUTO X16 → AUTO |
X20 | →AUTO X40 | → AUTO X80 | → AUTO X160 | → OFF |
30
AGC/MOTION
E
❿AGC
The AGC menu lightens the screen below the standard brightness because of the object taken in dark illumination. Setting up the AGC menu is available only in either High Speed Shutter mode or OFF mode.
If you press the LEFT or RIGHT key to reach the LOW or HIGH position,
the AGC function will start activating. LOW is used for the lower AGC GAIN whereas HIGH is used for the higher AGC GAIN.
While the COLOR/BW menu is set to AUTO, the AGC menu is all
| CAMERA ID | ON... | |
| IRIS | DC... | |
| BLC/WDR | OFF | |
| COLOR/BW | AUTO... | |
| SHUTTER | OFF | |
| AGC |
| - - - |
| WHITE BAL | ATW | |
| SYNC | INT | |
| SPECIAL | ... | |
| EXIT | QUIT | |
|
|
|
|
31