Auto Iris Lens Control Cable |
This cable transmits the control signal from the camera to control the lens
E shutter.
Back Focus Control Bar
It controls the back focus.
ALC Lens Setting Switch
This switch sets the Auto Iris lens type for use.
DC : When you attach an Auto Iris lens requiring the DC control signal, please put this switch in the DC position.
VIDEO : When you attach an Auto Iris lens requiring the video control signal, please put this switch in the VIDEO position.
E
AC
SCC-B2305(P) Rear View
① | Power Display LED |
|
|
|
|
|
| When the camera is supplied with power, LED is on. |
|
| |||
➁ | Video Output Terminal |
|
|
|
| |
| The monitor video input terminal is connected with this terminal through |
| ||||
| which the camera video signal comes out. |
|
| |||
➂ | Remote Input |
|
| |||
| This terminal is used for camera control at the production plant. |
| ||||
|
|
|
|
| 1 | TXD |
| 1 | 2 | 3 | 4 | 2 | RXD |
| 3 | +5V | ||||
|
|
|
|
| ||
|
|
|
|
| 4 | GND |
8 | 9 |