29P~60P(DS990)- NO GB 12/2/04 10:20 Page 54
Coping a Cassette(Dubbing)
You can copy a cassette from Tape 1 to Tape 2.
•Normal speed dubbing in selecting Tape function mode.
•You do not need to adjust the volume, as it has no effect on the recording.
•Take care not to insert the tape to be copied in Tape 2, as it will be erased when you start recording.
Recording a Compact Disc
You can record a compact disc on a cassette in two different ways:
Synchronised recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice only on Audio CD.
Switch the system | 2 | Insert a blank | 3 | Insert the tape to | |
be copied in Tape 1. | |||||
on by pressing |
| ||||
1 STANDBY/ON. | cassette in Tape 2. |
|
Switch the system
1 on by pressing
STANDBY/ON.
2 Insert a blank cassette in Tape 2.
•Press the PUSH/EJECT button ( 
) to open the cassette door, insert a cassette, and then close the cassette door.
•Insert the cassette with the safety tabs.
3 Load a compact disc.
•Press the OPEN/CLOSE button ( 
) to open the CD door.
•Insert a CD and press the OPEN/CLOSE button ( 
) to close the CD door.
Press DUBBING
4 button to copy a cassette.
The appropriate indications are displayed and the cassette in Tape 1 is copied to the cassette in Tape 2.
5 Press
STOP button.
Note |
•In Recoding,DPL II doesn’t work.
4 Press the DVD/CD
( 
) button.
•Use the CD selection ( 
, 
) buttons to select the desired song.
Press CD SYNCHRO
5 button.
•When stopped, press the button to start the recording from the first piece of music.
•Press and hold CD SYNCHRO button during the playback of CD to start the recording from the first part of the music being played.
6 To stop recording, press 
button.
Note |
•You can use CD/SYNCHRO button only in CD Playback Mode.
•In Recoding,DPL II doesn’t work.
TAPE DECK
59 | 60 |