Listening to a Cassette
Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 55.
Selecting the Cassette Playback Mode
Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically. (Deck 2 only).
DVD /CD
PREVIOUS/ TUNING NEXT/
DOWN MODE UP
Press REVERSE MODE until the appropriate symbol is displayed.
• 
: One side of the selected cassette and then stops. 
• 
: One side of the cassette. The other side of the cassette and then stops.
• 
: Both sides of the cassette indefinitely until you press stop.
PREVIOUS/ TUNING NEXT/
DOWN MODE UP
1 Switch the system on by pressing
STANDBY/ON.
2 Press TAPE on the player to select the Tape function.
Press the PUSH
3 EJECT ( 
) of the cassette deck to open the cassette door and insert a cassette.
Tape Counter
•Insert a cassette with the recording/playback side facing the cassette holder, and then push the cassette door shut.
When playing a cassette in one of the cassette decks, a counter is displayed to enable you to take note of the counter value at the start of each track to start playback at the beginning of the track to which you wish to
PREVIOUS/ | TUNING | NEXT/ |
DOWN | MODE | UP |
Press the 
4 button. The cassette
starts playing.
•Side A : Tape (
) button once.
•Side B : Tape ( 
) button twice. (DECK 2 only)
Note | If you have inserted two | |
cassettes, press Deck 1/2 | ||
| ||
| on the front panel or directly | |
| the Deck 1/2 button on the | |
| remote control to select the | |
| cassette to be played. |
5 Press the 
,
button if necessary.
•Rewind the cassette 
/ DOWN button.
•
button.
6 | When you have |
finished playback, | |
press STOP button. |
listen.
•Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing COUNTER RESET .
•Each cassette deck has a separate counter.
TAPE DECK |
45 | 46 |