Description
—Remote Control—
PREPARATION
Insert Remote Batteries
POWER STANDBY/ON button SLEEP button
OPEN/CLOSE button
DISC SKIP button
REPEAT button
TUNER button
TAPE PLAY button
ZOOM button
DIMMER, DEMO button
SLOW,MONO/ST button
SUB TITLE button DECK 1/2 button
AUX button
Play/Pause button 
Stop button
Tuning Preset/CD Skip button
1 Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow.
2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and
3 Replace the battery cover.
SOUND MODE button VOLUME button MENU button MUTE button
Number(0~9) buttons
TUNER MEMORY,P.SCAN button TUNING button
INFO button
RETURN button
Direction/Enter button
AUDIO button
REPEAT
STEP button
Caution Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and
•Use the correct type of batteries.Batteries that look similar may differ in voltage.
•Always replace both batteries at the same time.
•Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
TIMER/CLOCK button TIMER ON/OFF button EZ VIEW, NTSC/PAL button
DIGEST button SLIDE MODE button CANCEL button LOGO button
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
To open the remote control cover, push the top of the cover, then slide downward.
7 | 8 |