Disc Playback
1 Press OPEN/CLOSE button to open the disc tray.
2 Load a disc.
• Place a disc gently into the tray with the disc’s label facing up.
3 Press OPEN/CLOSE button to close the disc tray.
Note • For mixed discs, the play order is as below:MP3/WMA DIVX JPEG.
•Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some
• For CD discs, you can press the numeric buttons to select the track, when you press the numeric buttons after 3 seconds, the playback starts automatically.
•Table of contents of a
• DTS Audio disc is not supported.
• DVD Audio disc is not supported.
To stop playback, press STOP button during playback.
• If pressed once, the stop position will be stored in memory. If PLAY ( ) button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed, playback starts from the beginning.
To temporarily pause playback, press PAUSE button during playback.
• To resume playback, press PLAY( ) button again.
ENG
OPERATION
22