CD RIPPING Function
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
1Switch the system on by pressing
POWER.
Press CD
4 RIPPING button on remote control to starting ripping.
¡If the system is playing state, press this button, “TRACK RIPPING” is displayed and CD RIPPING starts.
¡If the system is playing state, press and hold this button, “FULL CD RIPPING” is displayed and CD RIPPING starts.
¡During CD ripping, do not disconnect USB device.
| 2 | Connect the |
| USB. | |
|
|
|
To stop ripping, press
5 STOP()button.and then automatically create and save as the MP3 file.
After
3 |
| Load a compact |
| disc(Digital | |
| Audio). |
Press the OPEN/CLOSE button to open the CD door.
Insert a CD and press the OPEN/CLOSE button to close the CD door.
Use the CD selection ( ) buttons to select the desired song.
Note
◆Don’t disconnected USB and AC Cord during
◆If you disconnected USB device when CD Ripping, the main unit will be power off and you may not delete the ripped file, In this case, please connect the USB on the PC and backup the USB data on the PC first and then formate the USB device .
◆When the USB memory is not enough, it will be displayed “RIPPING ERROR”.
◆
◆With external HDD, FAT format the USB can be CD Ripping, but not NTFS. The CD Ripping function of this product does not support all USB devices.
◆When you use CD high speed search function or in the Pause or Stop mode, the CD Ripping can’t work.
◆During CD Ripping, do not deal impact. If is shocked while CD Ripping, CD Ripping maybe disengage.
◆Sometimes, some of USB devices, CD Ripping time is long.
◆When CD Ripping completes or Stops, the CD will reload.
◆When HDMI audio on, the CD RIPPING can’t work.
51