Samsung WA22J8700GP/YL manual Leveling your washer

	NOTE
	Connect the hose guide (A) within 4 in (10
	cm)* from the end of the drain hose. If the
	drain hose is extended more than 4 in (10
*	cm) beyond the end of the hose guide, mold
	or microorganisms could spread to the
A	inside of the washer.

NOTE

The drain hose can be installed to a 96 in (245 cm) maximum, but the draining capability can be reduced at this height. It can cause the washer to have an odor because of remaining water in the drain system.

NOTE

If the drain hose is installed below 39 in (99 cm), water can be drained in cycles due to a siphon phenomenon. It causes the washer to display “4C”.

STEP 4  Leveling your washer

See if the washer is level by checking the position of the tub:

1. Slide the washer into position.

2. Open the lid of the washer, and pour the water into the tub to just below the pulsator level.

A

English  23

Installation

WA8700J_WA22J8700GP-03133Z-02_YL_EN.indd 23

2015/7/25 16:55:30