Sound, Garment Plus, Delay End, Pre Soak

Washing a load of laundry

NOTE

Adding laundry when Child Lock is on To add laundry, deactivate the Child Lock function. To deactivate the Child Lock function, press and hold Water Level and Power Wash simultaneously for at least 3 seconds. See the “Pause Option” section on page 34 for additional details.

Deactivating the Child Lock function

Press and hold both Water Level and Power Wash simultaneously for approximately 3 seconds.

		• When you deactivate the Child Lock
	Washing	function, the Child Lock indicator is
	Washing	children or the infirm from accidently
		turned off.
		• The Child Lock function prevents
	a	operating the washer and injuring
	loadof	themselves.
		themselves.
	laundry	WARNING
	laundry	If a child enters the washer, the child may
		If a child enters the washer, the child may
		become trapped and suffocate.
		CAUTION

•Once you have activated the Child Lock function, it continues working even if the power is turned off.

•Forcing the lid open can result in injury or damage to the product.

NOTE

To add laundry after you have activated the Child Lock function, you must first deactivate the Child Lock function.

Sound

The Sound Off function can be selected during all cycles.

32 English

Garment Plus

You can add or take out laundry items even after the wash has started, as long as the Garment Plus indicator is on. Pressing Start/Pause unlocks the lid. If you open the lid and want to continue the wash cycle, close the lid, and then press Start/Pause.

Delay End

You can set the washer to start your wash automatically at a later time, by choosing a delay time.

The hour displayed indicates the time at which the wash will be ended.

1.Set your wash cycle.

2.Press Delay End repeatedly until the delay time is set.

3.Press Start/Pause. The “Delay End” indicator will be lit, and the clock will begin counting down until it reaches the set time.

4.To cancel a Delay End function, press the Power button and then turn the washer on again.

Pre Soak

Use this function when the laundry is heavily contaminated or stained. This function improves the wash performance by adding a Pre Soak cycle.

•If you select this function, the total cycle time is increased by 10 or 20 minutes.

•When the Pre Soak cycle starts, the washer repeats a wash cycle after supplying water and then performs a 10 or 20 minute soak cycle.

•When the Pre Soak cycle is complete, the configured wash cycle starts without draining water.

WA8700J_WA22J8700GP-03133Z-02_YL_EN.indd 32

2015/7/25 16:55:32