STEP 2 Flooring
• The surface to install the refrigerator must support a fully loaded refrigerator, or approximately 90 kg.
• To protect the floor, put a large piece of cardboard on each leg of the refrigerator.
• Once the refrigerator is in its final position, do not move it unless necessary to protect the floor. If you have to, use a thick paper or cloth such as old carpets along the movement path.
STEP 3 Adjust the levelling legs
Level the refrigerator by manually adjusting the levelling legs. Turn the levelling legs clockwise to lower the position, or turn counter clockwise to raise. For safety reasons, adjust the front side a little higher than the rear side.
Leave the legs at least (A) mm from the floor as shown.
•(A) 39 mm for RT18*
•(A) 43 mm for RT21*
Installation
A
English 27