STEP 5 Reattach the doors on the opposite side
1.Use a flat-heat screwdriver to remove the middle-hinge screw cap, and then
reinsert it on the opposite side.
2.Use the flat-heat screwdriver to remove
the flange-screw cap to reveal the flange screw. Use a Phillips screwdriver to remove the flange screw, and then tighten it on the opposite side. Finally, close the flange-screw cap on the opposite side.
3.Remove the grommet ring from the
middle-hinge shaft, and then reinsert the ring on the other side of the shaft. See the figure for visual reference.
Maintenance
English 51