Samsung DVD-E360/XV Changing setup menu, Using the Setup Menu, Setting Up the Display Options

Karaoke Sound Recording

1.Insert USB storage media into USB jack and then connected the microphone plug to Mic.

2.To star karaoke recording, choose one of VCD/DVD/SVCD file, then press RECORD button.

3.When recording, user can only press STOP button and PAUSE button to cancel the recording.

4.If user do cancelation, then file result will be saved.

Note

-If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone away from the speakers or turn down the microphone volume or the speaker volume.

-When playing MP3, WMA and LPCM disc, the karaoke functions will not operate.

-When the MIC is connected, Digital Out does not work.

-The MIC sound outputs only from Analog Audio Out.

-If MIC is connected to the MIC jack on the front panel, 5.1CH audio will be changed in to 2 CH audio automatically, this condition can’t be change unless the MIC is plugged out.

MY KARAOKE

My Karaoke is the feature that makes non karaoke VCD/DVD can be used like karaoke disc, by removing lead singer vocal sound.

Using the My Karaoke feature :

1.Connect the microphone.

2.Choose My Karaoke setting in Setting --> Audio --> My Karaoke and then select one of three enable mode :

-Original Vocal : This setting will keep the original vocal sound.

-Min. Reduction : this setting reduce the main vocals sound sligthly.

-Max. Reduction : This setting will reduce the main vocals sound greatly

3.Insert and play DVD or VCD media, this feature only for VCD.DVD non karaoke type.

Note

1.Feature will disabled when :

-Removing the microphone, or

-Changing “My Karaoke” settings to “Original Vocals” or

-Playing Karaoke audio, or

-Playing non supported file type (ex : *.avi: *.mp3; *.divx; etc)

2.No pop-up notification when feature disabled.

Changing setup menu

Using the Setup Menu

The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have.

1.With the unit in Stop mode, press the MENU button on the remote control. Press the √/® but- tons to select SettingS, then press the ENTER button.

2.Press the π/† buttons to select a Setup Menu, then press the ® or ENTER to bring up the sub-menu.

3.Press the π/† buttons to select a sub-menu option, then press the ® or ENTER.

4.To make the setup screen disappear after setting up, press the RETURN button.

Setting Up the Display Options

Display options enable you to set various video functions of the player.

1.With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SettingS, then press the ENTER button.

2.Press the π/† buttons to select DIsplay, then press the ® or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

Note

•Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan set- tings in the TV’s menu system.

•If Video Output is set incorrectly, the screen may be blocked.

•When the resolution is changed during playback, it may take a few seconds for a normal image to appear.

Setting Up the Audio Options

Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use.

1.With the unit in Stop mode, press the MENU button. Press the √/® buttons to select Setting, then press the ENTER button.

2.Press the π/† buttons to select Audio, then press the ® or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

Note :

-When play a disc that has MPEG Audio and you have Bitstream selected in the Audio Options menu, the Digital Audio jack may not output audio

-There is no analogue audio output when you play a sound disc.

-Even when PCM Down sampling is Off

• Some discs will only output down sampled audio through the digital outputs.

11