Samsung DVD-E360/XV manual Advanced functions

Using the Display Function

When Playing a DVD/VCD/MPEG4

1.During play, press the TOOLS button on the remote control.

2.Press the π/† buttons to select the desired item.

3.Press the √/® buttons to make the desired setup.

4.To make the screen disappear, press the TOOLS button again.

The functions when using the Display function are listed in the table below.

To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified.

Most DVD discs are recorded in chapters so that you can quickly find a specific passage.

Allows playback of the film from a desired time. You must enter the starting time as a refer- ence. The time search function does not operate on some discs.

Lets you select the soundtrack language for a film. A DVD disc can have up to eight different soundtracks.

Lets you select the subtitle language or, if you prefer, turn off subtitles. A DVD disc can have up to 32 different sets of subtitles, each in a different language.

EZ Lets you choose the EZ-View type

Select to activate the Zoom function.

Some DVDs have scenes that have been recorded at multiple angles. Use the Angle function to view a scene at one of those angles.

Using the Disc and Title Menu

During the playback of a DVD disc, press the Disc Menu/Title Menu button on the remote control.

Note

-Depending on a disc, the Disc Menu/Title Menu may not work.

-You can also use the Disc Menu, using the DISC MENU button on the remote control.

-Title Menu will only be displayed if there are at least two titles in the disc.

Repeat Play

Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.

When playing a DVD/VCD

1.Press the REPEAT button on the remote control. Repeat screen appears.

2.Press the REPEAT or π/† button to change playback mode. DVD repeats play by chapter or title.

- Off.

6

-Title : repeats the title that is playing.

-Chapter : repeats the chapter that is playing.

-Repeat A-B

Using the A-B Repeat function (Only DVD-E360K)

1.Press the REPEAT button on the remote control. The repeat screen appears.

2.Press the π/† button to select the REPEAT A-B and then press ENTER.

3.Press the ENTER at the point where you want repeat play to start (A).

4.Press the ENTER at the point where you want repeat play to start (B).

Using the A-B Repeat function (Only DVD-E360,E350)

1. Press the REPEAT A-Bbutton on the remote control.

2.Press the REPEAT A-Bbutton at the point where you want repeat play to start (A). 3.Press the REPEAT A-Bbutton at the point where you want the repeat play to stop (B).

3.To return to normal play, press the REPEAT A-Bbutton until the display shows Repeat : Off.

Note

-A-B REPEAT allows you to set point (B) directly after point (A) has been set.

-Depending on a disc, the Repeat function may not work.

Slow Play

This feature allows you slowly to repeat scenes con-taining sports, dancing, musical instruments being played etc., so you can study them more closely.

When playing a DVD

1.During play, press the PLAY ( ) button.

2.Press the SEARCH (k/K) button to choose the play speed between 1/2, 1/4, 1/8,1/16 and so on. If you want to go normal play press PLAY button.

Advanced functions

Adjusting the Aspect Ratio (EZ View)

To play back using aspect ratio (DVD)

1.During play, press the TOOLS button on the remote control.

2. Press the π/† buttons to select EZ icon. Each time you press the √/® buttons, the screen size changes. For graphics of the screen sizes and lists of the sequences in which the sizes change, see the next column.

3.Press the RETURN button to exit EZ View.

If you are using a 16:9 TV

For 16:9 aspect ratio discs	For 4:3 aspect ratio discs
- WIDE SCREEN	- Normal Wide
- SCREEN FIT	- SCREEN FIT
- ZOOM FIT	- ZOOM FIT
	- Vertical Fit