Using the Disc Menu, Using the Title Menu

Using the Display Function

Using the Disc and Title Menu

Using the Function Menu

Repeat Play

To access the desired title when there is Title more than one in the disc.

For example, if there is more than one movie on a DVD, each movie will be identified.

Most DVD discs are recorded in

Chapter chapters so that you can quickly find a specific passage (similar to tracks on an

audio CD).

Allows playback of the film from a

Time desired time. You must enter the starting time as a reference.

Refers to the language of the film Audio soundtrack. In the example, the

soundtrack is played in English 5.1CH. A DVD disc can have up to eight different soundtracks.

Refers to the subtitle languages Subtitle available in the disc.

You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.

A DVD disc can have up to 32 different subtitles.

Note

*When in VCD 2.0 mode (MENU ON mode), this function does not work. (See page 13)

Using the Disc Menu

1.During the playback of a DVD disc, press the MENU button on the remote.

2.Select Disc Menu using the UP/DOWN buttons, then press the RIGHT or ENTER button.

Using the Title Menu

1.During the playback of a DVD disc, press the MENU button on the remote.

2.Select Title Menu using the UP/DOWN buttons, then press the RIGHT or ENTER button.

Note

•Depending on the disc, the Title and Disc Menus may not work.

•Title Menu will only be displayed if there are at least two titles in the disc.

•You can also use the Disc Menu, using the DISC MENU button on the remote.

•In VCD 2.0, the DISC MENU button is used to select Menu On or Menu Off mode.

Using the Function Menu

1.Press the MENU button during playback.

2.Use the UP/DOWN buttons to highlight Function, then press the RIGHT or ENTER button.

3.Function selection screen appears: Info, Zoom, Bookmark, Repeat and EZ View.

-Info (See Page 13~14)

-Zoom (See Page 21)

-Bookmark (See Page 20)

-Repeat (See Page 15)

-EZ View (See Page 17)

4.Use the UP/DOWN button to highlight one of the 5 functions. Then press the RIGHT or ENTER button to access the function.

NoteNote

•You can also directly select the parts of these functions using their respective buttons on the remote.

Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.

When playing a DVD/VCD/CD

1.Press the REPEAT button on the remote. Repeat screen appears.

2.Select Chapter, Title or A-B using the LEFT/RIGHT buttons.

•Chapter ( ) : repeats the chapter that is playing.

•Title ( T ) : repeats the title that is playing.

•A-B : repeats a segment of the disc that you select.

DVD

Off	01 T 01 A - B REPEAT ENTER

VCD/CD

Off T 01 D 01 A - B REPEAT ENTER

3.Press ENTER.

4.To return to normal play, press REPEAT again, then press the LEFT/RIGHT buttons to select Off and press ENTER.

* REPEAT A-B button (DVD-P148 only)

•Press the REPEAT A-B button to select the point where the function starts. (A)

•Press the REPEAT A-B button to select the point where the function ends. (B)

•To terminate the function, press the 'CLEAR' button or the 'REPEAT A-B' button again.

•A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.

NoteNote

•DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.

•To terminate the function, press the CLEAR button.

•Depending on the disc, the Repeat function may not work.

•When in VCD 2.0 mode (MENU ON mode), this function does not work. (See page 13)

ENG-14

ENG-15