Samsung UA55C6900VMXXV, UA32C6900VMXXV Sound Reset OK / Cancel, Selecting the Sound Mode t, Time

■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

✎✎ By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.

Audio Delay: Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver.

■■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Selecting the Sound Mode t

When you set to Dual l ll, the current	I-II
sound mode is displayed on the screen.
	DUAL

	Audio	Dual 1/2	Default
	Type
A2	Mono	MONO	Automatic
	Stereo	STEREO ↔ MONO	change
Stereo
	Dual	DUAL 1 ↔ DUAL 2	DUAL 1
	Mono	MONO	Automatic
NICAM	Stereo	MONO ↔ STEREO	change
Stereo	Dual	MONO ↔ DUAL 1	DUAL 1
		DUAL 2

✎✎If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.

✎✎Only activated in stereo sound signal.

✎✎Only available when the Input source is set to TV.

Setup Menu

¦¦ Setting the Time

Time

■■ Clock: Setting the clock is for using various timer features of the TV.

OO The current time will appear every time you press the INFO button.

✎✎ If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

✎✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

✎✎ The antenna must be connected in order to set the time automatically.

Clock Set: Set the Day, Month, Year, Hour and Minute manually.

✎✎ Available only when Clock Mode is set to Manual.

¦¦ Using the Sleep Timer

■■ Sleep Timer t: Automatically shuts off the TV after a preset period of time. (Off,30min, 60min, 90min, 120min, 150min and 180min).

✎✎ To cancel Sleep Timer, select Off.

¦¦ Setting the On/Off Timer

■■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.

Timer 1

	On Time
	Inactivate	12				00				am
	Off Time
	▲	12				00				am
▲	Inactivate
	▼
	Volume	Source			Antenna				Channel
	20		TV			DTV Air				1
	Repeat		Sun Mon		Tue	Wed		Thu		Fri	Sat
	Once
			LMove	U Adjust			E Enter			R Return

03 Basic Features

English 17