Samsung EC-A50ZZSBA/FR, EC-A5ZZZSAB manual +/- button, Sub menu, Auto, Cameras sensitivity is

Page 36

+/- button

You can use the +/- button to adjust the values for the ISO, white balance and exposure compensation.

Main menu

Sub menu

Available camera mode

 

 

 

ISO

AUTO, 100, 200, 400

 

 

 

 

 

AUTO, DAYLIGHT, CLOUDY,

 

WHITE BALANCE

FLUORESCENT H, FLUORESCENT L,

 

 

TUNGSTEN, CUSTOM.

 

Exposure compensation

-2.0~0.0~+2.0(0.5EV steps)

ISO: You can select the ISO sensitivity when taking pictures.

The speed or specific light-sensitivity of a camera is rated by ISO numbers.

Selecting an ISO Sensitivity

 

1. Press the +/- button, and then use the UP and DOWN

buttons to select the ISO icon(

). The ISO menu bar

will appear as shown.

 

2. Use the LEFT and RIGHT buttons to select the desired

ISO sensitivity value.

 

- AUTO

: The camera's sensitivity is

 

automatically changed by variables

 

such as lighting value or subject brightness.

-100, 200, 400 : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity. However, the image may be saturated in high luminance. The higher the ISO value, the higher the

camera’s sensitivity to light is and therefore the greater its capacity to take pictures in dark conditions. However, the noise level in the image will increase as the ISO value increases, making the image appear coarse.

3.When you press the +/- button again, the value you set will be saved and ISO setup mode will end.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents English Instructions Contents Dpof Cancel FAQDpof Dpof Standard Dpof IndexGetting to know your camera About the iconsPage An FCC warning This digital camera can be used for Editing images on a PC Refer toThis digital camera can be used for Manufacturers contents Identification of features Front & TopBack & Bottom Mode dial TimerSide/ 5-function button Flash SelfIdentification of features Mode Auto Scene Mode TextPlay Connecting to a Power Source Important information about battery usageNi-Cdover 1000mAh Battery indicator Instructions on how to use the memory card 2592 2272 2048 1600 1024 640 320 FineInserting the memory card Removing the memory cardLCD monitor indicator AEBStarting the recording mode Select the Auto mode by rotating the mode dialISO Press the shutter button to capture an imageStarting the recording mode Please see page 40 for details on Aperture and Shutter Value will display on the bottom of the LCD monitorFor as long as the available recording time Recording time will display on the LCD monitorNight Scene mode Things to Watch Out for When Taking Pictures Pressing the shutter button down half wayPress the shutter button again. In Still Image mode Zoom W/T buttonZoom W/T button Subject will appear nearerDigital zoom Tele Zoom T button will have no effectVoice memo / UP button Macro / Down button Focusing Voice memo / UP buttonMacro / Down button Focusing Focus lockFlash / Left button Unit mISO Autofocus Macro Wide Tele ~3.0 ~2.0 25~0.8X X X X X X X X X X X X X X O O O O O O O O O O O O OSelf-timer / Right button 10SEC self-timerDouble self-timer SecondsMENU/ OK button Menu button+/- button Sub menuAuto Cameras sensitivity isDaylight CloudyTungsten CustomWhite paper ASM buttonManual & Scene mode button Press the Shutter button to take the pictureAUTO, F2.7 ~ F11 LargeSmall Slow FastLCD button Using the LCD monitor to adjust the camera settings Camera working modeMetering Multi Spot Effect Sepia SoftMYSET1 Myset MYSET2 MYSET3How to use the menu SizeUse the UP and Down buttons to select a sub menu Size QualityAvi Metering Continuous shotSingle Continuous shot EffectFine Normal RGBEffect SharpnessVivid Press the Left/Right buttons to select the Myset Menu tapSlot number to save Press the right buttonScene Starting play mode Clip, the movie clip indicator Voice file, the voice indicator Will be displayed onSize Flash OFFDate Thumbnail Enlargement button Cancel TrimPause mode Resumes playback Play & Pause / Down buttonMicrophone is the best distance to record sound Temporarily stops playbackLEFT/ RIGHT/ MENU/ OK button Change the display as shown belowImage & Icons Image & Information Image only Delete button Setting up the play back function using the LCD monitor Slide RepeatResize Protect ONE PICMenu tab Main menu Sub menu Secondary menu PrintDpof Print Reset Custom SETPress the OK button to save the configuration Starting the slide showOn selected Rotating an image HorizontalVertical Resize Image Resize Types 2272X 2048X 1600X 1024X 640XLogo 1704 1536 1200 768 480Protecting images ALL PicsLock Selecting no Cancels Delete All Deleting all imagesMenu tab Select the Standard menu by pressing the UP Down button and press the Right buttonPicture, excluding movie clips and voice RecordingsDpof Print Size If Index is selectedLEFT/ Right button YES All images saved in the internal memory arePrinter Setup PictBridgeImages Dpof Auto PrintPictBridge Picture Selection Printer.See p.70Images menu will appear Use the UP and Down buttons to select the desiredPictBridge Printing StandardPrint the pictures stored PaperPictBridge Print Setting Auto SETAUTO, DRAFT, NORMAL, Fine AUTO, OFF, onPictBridge Reset Setup menu File name Computer PrinterLCD 3SECAuto power off Press the LEFT/ Right button and select the Setup menu tabSelecting OFF Power off function will not operate File nameLanguage Down button and press the Right buttonFormatting a memory card Setting up the Date/ Time Date typeImprinting the recording date Function lampImprint type, and then press the OK button Date & Time will be imprinted on the image fileFunction lamp SoundSelecting an External Device USB LCD brightnessSelecting an External Device ComputerInitializationRESET ALL Quick view~ 3 SEC If no is selectedSetting up the Mycam menu Turned on Setting a Startup ImageStart up image Shutter sound Start up soundImportant notes Important notes Card Error File ErrorLOW Battery Card FullBefore contacting a service center Symptom Causes Remedy Macro shot modeMode Unclear Clean the lensWhen using Check the connectionCamera is off Turn the camera on ConnectionSpecifications Dimensions WxHxD Special FeaturesFile Format 640 640x480 pixelsSoftware Notes System RequirementsAbout the software Setting up the application software Install Digimax Viewer. Click Next button Frame 8 may not appear according to System requirements Click the OK buttonSelect Components window will appear. Click Next button 101 102 103 104 Starting PC Mode COMPUTER, and then press the OK buttonCut 107 Removing the USB Driver for Windows 98SE Removable Disk Removing the removable disk Setting up the USB Driver for MAC Using the USB Driver for MACDigimax Viewer PropertyUsing PhotoImpression Digimax Reader Digimax Reader Recognized as textFAQ Manager Install the camera driver correctly Tab and then click Update Driver or Reinstall DriverUSB interface Case When using the USB hub CaseSettings Control 119 6806-2290
Related manuals
Manual 128 pages 17.7 Kb Manual 74 pages 46.46 Kb Manual 120 pages 62.49 Kb Manual 128 pages 13.25 Kb Manual 74 pages 27.87 Kb Manual 124 pages 13.71 Kb Manual 128 pages 18.7 Kb

EC-A50ZZSBA/DE, EC-A5ZZZSAC, EC-A50ZZSBA/E1, EC-A5ZZZSBA/US, EC-V50ZZSAA specifications

The Samsung EC-V50ZZSBA and its variants, including EC-V50ZZSAA, EC-V50ZZSBA/GB, EC-V50ZZSBA/FR, and EC-V50ZZSBA/AS, are a series of state-of-the-art vacuum cleaners designed to meet the diverse needs of modern households. With a focus on advanced technologies and user-friendly features, these vacuum cleaners stand out in the market.

One of the most significant features of the EC-V50ZZSBA series is its powerful suction capability. Equipped with a robust motor, these vacuum cleaners are designed to effectively pick up dust and debris from various surfaces, including carpets, hardwood floors, and tiles. Their multi-surface cleaning capability ensures that users can maintain a clean environment regardless of their flooring choices.

Another standout technology is the Cyclone Force technology, which enhances the vacuum's efficiency by utilizing centrifugal force to separate dust and dirt from the air. This feature helps to maintain a consistent level of suction power, reducing the risk of clogging and ensuring that the vacuum operates at optimal performance over extended periods. As a result, users can enjoy a thorough clean without interruptions.

The EC-V50ZZSBA series also emphasizes user convenience with its lightweight design. Weighing in at a manageable level, these vacuum cleaners are easy to maneuver around the home, making it simple for users to reach tight spaces and under furniture. Additionally, the ergonomic handle ensures a comfortable grip, further enhancing ease of use during cleaning sessions.

For those concerned about allergens, these vacuums are equipped with advanced filtration systems, including HEPA filters. These filters effectively capture fine particles, including dust mites and pet dander, making them an excellent choice for allergy sufferers. The combination of powerful suction and high-efficiency filtration ensures a healthier living environment.

The EC-V50ZZSBA series also boasts a range of accessories designed to tackle various cleaning tasks. From crevice tools for tight spaces to upholstery brushes for cleaning furniture, these attachments enable users to customize their cleaning routine based on specific needs.

In summary, the Samsung EC-V50ZZSBA and its variants offer an impressive combination of powerful suction, advanced filtration, and user-friendly design. With innovative technologies and versatile features, these vacuum cleaners cater to the demands of contemporary homeowners seeking effective and convenient cleaning solutions.
Top Page Image Contents