Samsung EC-A50ZZSBA/E1 Card Error, Card Full, No Image, No Card, File Error, LOW Battery, Set Usb

Page 89

Warning indicator

There are several warnings that may appear on the LCD display

Warning indicator

Causes

Remedy

 

 

 

 

- Memory card error

- Turn off the camera power and turn it on again

CARD ERROR !

 

- Insert the memory card again

 

 

- Format the memory card (p.79)

 

 

 

 

- There is insufficient memory

- Insert a new memory card

CARD FULL !

capacity to take an image

- Delete unnecessary image files to free up

 

 

some memory

 

 

 

 

- There are no images stored

- Take images

NO IMAGE !

on the memory card

- Insert a memory card that is holding some

 

 

images

 

 

 

 

- A memory card is not inserted

- Insert a memory card

NO CARD !

- The camera can’t recognize

- Insert the memory card again

 

the memory card

- Turn off the camera power and turn it on again

 

 

 

FILE ERROR !

- File error

- Format the memory card

- Memory card error

- Contact a camera service center

 

 

 

 

LOW BATTERY !

- There is low battery capacity

- Insert fresh batteries

 

 

 

CARD LOCKED !

- The memory card is locked

- Slide the write protect switch to the top of the

 

memory card

 

 

 

 

 

LOW LIGHT !

- When taking pictures in dark

- Use a tripod and take pictures in Flash

places

Photography mode

 

 

 

 

 

- [USB] sub menu and

- Reconfigure [USB] in the [SETUP] menu.

SET USB

connected device are not

 

 

matched.

 

 

 

 

89

Page 88 Page 90
Image 89
Page 88 Page 90
Contents English Instructions Contents FAQ Dpof CancelDpof Dpof Standard Dpof IndexAbout the icons Getting to know your cameraPage An FCC warning Editing images on a PC Refer to This digital camera can be used forThis digital camera can be used for Manufacturers contents Back & Bottom Identification of featuresFront & Top Timer Mode dialSide/ 5-function button Flash SelfIdentification of features Play Mode AutoScene Mode Text Ni-Cdover 1000mAh Connecting to a Power SourceImportant information about battery usage Battery indicator Instructions on how to use the memory card Fine 2592 2272 2048 1600 1024 640 320Removing the memory card Inserting the memory cardAEB LCD monitor indicatorSelect the Auto mode by rotating the mode dial Starting the recording modeISO Press the shutter button to capture an imageStarting the recording mode Value will display on the bottom of the LCD monitor Please see page 40 for details on Aperture and ShutterRecording time will display on the LCD monitor For as long as the available recording timeNight Scene mode Pressing the shutter button down half way Things to Watch Out for When Taking PicturesZoom W/T button Press the shutter button again. In Still Image modeSubject will appear nearer Zoom W/T buttonDigital zoom Tele Zoom T button will have no effectVoice memo / UP button Voice memo / UP button Macro / Down button FocusingFocus lock Macro / Down button FocusingUnit m Flash / Left buttonISO Autofocus Macro Wide Tele ~3.0 ~2.0 25~0.8X X X X X O O O O O O O O O O O O O X X X X X X X X X10SEC self-timer Self-timer / Right buttonDouble self-timer SecondsMenu button MENU/ OK buttonSub menu +/- buttonAuto Cameras sensitivity isCloudy DaylightTungsten CustomWhite paper Press the Shutter button to take the picture ASM buttonManual & Scene mode buttonLarge AUTO, F2.7 ~ F11Small Slow FastLCD button Metering Multi Spot Using the LCD monitor to adjust the camera settingsCamera working mode Soft Effect SepiaMYSET1 Myset MYSET2 MYSET3Use the UP and Down buttons to select a sub menu How to use the menuSize Avi SizeQuality Single MeteringContinuous shot Effect Continuous shotFine Normal RGBVivid EffectSharpness Menu tap Press the Left/Right buttons to select the MysetSlot number to save Press the right buttonScene Starting play mode Voice file, the voice indicator Will be displayed on Clip, the movie clip indicatorDate SizeFlash OFF Thumbnail Enlargement button Trim CancelPlay & Pause / Down button Pause mode Resumes playbackMicrophone is the best distance to record sound Temporarily stops playbackImage & Icons Image & Information Image only LEFT/ RIGHT/ MENU/ OK buttonChange the display as shown below Delete button Slide Repeat Setting up the play back function using the LCD monitorResize Protect ONE PICDpof Print Menu tab Main menu Sub menu Secondary menuPrint Custom SET ResetOn selected Press the OK button to save the configurationStarting the slide show Vertical Rotating an imageHorizontal Image Resize Types 2272X 2048X 1600X 1024X 640X ResizeLogo 1704 1536 1200 768 480Lock Protecting imagesALL Pics Deleting all images Selecting no Cancels Delete AllDown button and press the Right button Menu tab Select the Standard menu by pressing the UPPicture, excluding movie clips and voice RecordingsIf Index is selected Dpof Print SizeYES All images saved in the internal memory are LEFT/ Right buttonPictBridge Printer SetupImages Dpof Auto PrintPrinter.See p.70 PictBridge Picture SelectionImages menu will appear Use the UP and Down buttons to select the desiredStandard PictBridge PrintingPrint the pictures stored PaperAuto SET PictBridge Print SettingAUTO, DRAFT, NORMAL, Fine AUTO, OFF, onPictBridge Reset Setup menu Computer Printer File nameLCD 3SECPress the LEFT/ Right button and select the Setup menu tab Auto power offSelecting OFF Power off function will not operate File nameDown button and press the Right button LanguageFormatting a memory card Date type Setting up the Date/ TimeFunction lamp Imprinting the recording dateImprint type, and then press the OK button Date & Time will be imprinted on the image fileSound Function lampLCD brightness Selecting an External Device USBSelecting an External Device ComputerQuick view InitializationRESET ALL~ 3 SEC If no is selectedStart up image Setting up the Mycam menuTurned on Setting a Startup Image Start up sound Shutter soundImportant notes Important notes File Error Card ErrorLOW Battery Card FullBefore contacting a service center Macro shot mode Symptom Causes RemedyMode Unclear Clean the lensCheck the connection When usingCamera is off Turn the camera on ConnectionSpecifications Special Features Dimensions WxHxDFile Format 640 640x480 pixelsSystem Requirements Software NotesAbout the software Setting up the application software Install Digimax Viewer. Click Next button Click the OK button Frame 8 may not appear according to System requirementsSelect Components window will appear. Click Next button 101 102 103 104 COMPUTER, and then press the OK button Starting PC ModeCut 107 Removing the USB Driver for Windows 98SE Removable Disk Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACProperty Digimax ViewerUsing PhotoImpression Digimax Reader Recognized as text Digimax ReaderFAQ Tab and then click Update Driver or Reinstall Driver Manager Install the camera driver correctlyUSB interface Case When using the USB hub CaseSettings Control 119 6806-2290
Related manuals
Manual 128 pages 17.7 Kb Manual 74 pages 46.46 Kb Manual 120 pages 62.49 Kb Manual 128 pages 13.25 Kb Manual 74 pages 27.87 Kb Manual 124 pages 13.71 Kb

EC-A50ZZSBA/DE, EC-A5ZZZSAC, EC-A50ZZSBA/E1, EC-A5ZZZSBA/US, EC-V50ZZSAA specifications

The Samsung EC-V50ZZSBA and its variants, including EC-V50ZZSAA, EC-V50ZZSBA/GB, EC-V50ZZSBA/FR, and EC-V50ZZSBA/AS, are a series of state-of-the-art vacuum cleaners designed to meet the diverse needs of modern households. With a focus on advanced technologies and user-friendly features, these vacuum cleaners stand out in the market.

One of the most significant features of the EC-V50ZZSBA series is its powerful suction capability. Equipped with a robust motor, these vacuum cleaners are designed to effectively pick up dust and debris from various surfaces, including carpets, hardwood floors, and tiles. Their multi-surface cleaning capability ensures that users can maintain a clean environment regardless of their flooring choices.

Another standout technology is the Cyclone Force technology, which enhances the vacuum's efficiency by utilizing centrifugal force to separate dust and dirt from the air. This feature helps to maintain a consistent level of suction power, reducing the risk of clogging and ensuring that the vacuum operates at optimal performance over extended periods. As a result, users can enjoy a thorough clean without interruptions.

The EC-V50ZZSBA series also emphasizes user convenience with its lightweight design. Weighing in at a manageable level, these vacuum cleaners are easy to maneuver around the home, making it simple for users to reach tight spaces and under furniture. Additionally, the ergonomic handle ensures a comfortable grip, further enhancing ease of use during cleaning sessions.

For those concerned about allergens, these vacuums are equipped with advanced filtration systems, including HEPA filters. These filters effectively capture fine particles, including dust mites and pet dander, making them an excellent choice for allergy sufferers. The combination of powerful suction and high-efficiency filtration ensures a healthier living environment.

The EC-V50ZZSBA series also boasts a range of accessories designed to tackle various cleaning tasks. From crevice tools for tight spaces to upholstery brushes for cleaning furniture, these attachments enable users to customize their cleaning routine based on specific needs.

In summary, the Samsung EC-V50ZZSBA and its variants offer an impressive combination of powerful suction, advanced filtration, and user-friendly design. With innovative technologies and versatile features, these vacuum cleaners cater to the demands of contemporary homeowners seeking effective and convenient cleaning solutions.
Top Page Image Contents