Samsung EC-A400ZSBA/E1, EC-UC501SBA/US, EC-UC501SBB/US manual Before contacting a service centre

Page 85

Before contacting a service centre

Camera does not take images when pressing the Shutter button

There is insufficient memory capacity

Delete unnecessary image files

The memory card has not been formatted

Format the memory card (p.73)

The memory card is exhausted

Insert a new memory card

The memory card is locked

Refer to [CARD LOCKED!] error message (p.83)

The camera’s power is off

Turn the camera power on

The batteries are exhausted

Insert fresh batteries

Batteries are inserted incorrectly with the reverse polarities

Insert the batteries according to the polarity marks (+, -)

The camera suddenly stops working while in use

The camera was stopped due to a malfunction

Remove /re-insert batteries and switch the camera on

The images are unclear

A picture was taken within 0.8 m from the subject without setting an appropriate macro mode

If the subject is closer than 0.8m, select macro shot mode Taking a picture beyond the flash range

Take a picture within the flash range The lens is smudged or dirty

Clean the lens

The flash does not fire

Flash off mode has been selected

Dis-engage flash off mode

The camera mode can’t use the flash

Refer to the FLASH instruction (p.27)

Incorrect date and time is displayed

The date and time have been set incorrectly or the camera has adopted the default settings Reset the date and time correctly

85

Page 84 Page 86
Image 85
Page 84 Page 86
Contents English Instructions Contents FAQ Dpof CancelDpof Dpof Standard Dpof IndexAbout the icons Getting to know your cameraPage An FCC warning Pouch Camera strap System chartSNB-2312 AC cordYellow cable Video See p.77 Cant recognize the camera For WindowsFront & Top Identification of featuresBack & Bottom Side / 5-function button Mode switchFlash LeftProgram Mode Scene Night PortraitMode TextLithium Alkaline, Ni-Mn, Ni-Zn, LithiumRechargeable batteries AA type Ni-Cd over 1000mAhPolarity + Connecting to a Power SourceArrow Insert the batteries taking note of the polarity +Instructions on how to use the memory card Fine InformationRemoving the memory card Inserting the memory cardLCD monitor indicator ISO Starting the recording modePress the shutter button once and movie clips are File type AviMJPEGStarting the recording mode Pressing the shutter button down half way Things to Watch Out for When Taking PicturesRecording Still IMAGE, Voice Recording Zoom W/T buttonZoom W/ T button Voice memo / UP button Voice memo / UP button Macro / Down button Focusing~ 80cm 39 ~ 80cm Focus lock Macro / Down button FocusingPortrait TextISO Wide Tele Flash / Left buttonAutomatically Flash mode indicator Icon DescriptionReduction function Flash fires regardless of available light10SEC self-timer Self-timer / Right buttonDouble self-timer Menu button MENU/ OK button+/- button White paper Selecting the Night scene Mode LCD button Night Mode Using the LCD monitor to adjust the camera settingsText Fireworks SizeSoft Effect SepiaLoad SaveMode How to use the menuLandscape 2272 2048 1600 1024 640 320 SizeAvi QualityContinuous shot MeteringMulti Spot SingleNormal EffectRGB Photo Frame Sub menu Icon SharpnessEdges of the image are softened VividSave / Load the camera configuration Myset Starting play mode Images is the same as the method of playing back voice files Connect the camera to your PCFlash OFF 2272X1704 Size F2.9 Aperture value Shutter speedFlash is used Date100-0009 Thumbnail / Enlargement buttonCancels trimming CancelTrim Voice memoPlay & Pause / Down button Pause mode Resumes playbackVoice memos can’t be recorded onto movie clip files Temporarily stops playbackLEFT/ RIGHT/ MENU/ OK button LCD monitor by pressing the play mode buttonDisplay OK buttonDelete button Slide Repeat Setting up the play back function using the LCD monitorResize Protect ONE PICPrint Menu tab Main menu Sub menu Secondary menuDpof Print Custom SET ResetStarting the slide show Press the OK button to save the configurationOn selected Horizontal Rotating an imageVertical Image Resize Types 2048X 1600X 1024X 640X ResizeLogo 1536 1200 768 480ALL Pics Protecting imagesUnprotected LockDeleting all images Selecting no Cancels Delete AllButton and press the OK button Current picture only Press the LEFT/ Right button and select the Dpof menu tabRecordings Select the Index menu by pressing the UP/ DownIf Index is selected Dpof Print SizeLEFT/ Right button Cancels Copy to CardPictBridge Printer SetupImages PictBridge Picture Selection Standard PictBridge PrintingPrint the pictures stored PaperAuto SET PictBridge Print SettingYES AUTO, DRAFT, NORMAL, FinePictBridge Reset Setup menu Computer Printer File nameNtsc File name Auto power offSelect the PWR Save menu by pressing the UP Down button and press the Right buttonLanguage Setting LanguageSelect the Language menu by pressing the UP Formatting a memory card Setting up the Time Setting up the DateImprinting the recording date Date typeImprint type, and then press the OK button Date & Time will not be imprinted on the image fileSelecting an External Device USB BeepComputer Select this if you want to connect the camera to your PCSelecting Video out type Quick view InitializationRESET ALLStart up image Setting up the Mycam menuBeep OFF Select the S.BEEP menu by pressing the UP/ Down Start up soundImportant notes Important notes File Error There is low battery capacity Insert fresh batteries Before contacting a service centrePlease check the following Camera suddenly stops working while in use Before contacting a service centreCable connection is incorrect Exposure is excessive Reset exposure compensationSpecifications 1024 1024X768 pixels 2048 2048X1536 pixelsApplication System Requirements Software NotesRecommended About the software Setting up the application software Destination selection window will open. Click Next Click the OK button Frame 8 may not appear according to System requirementsSelect Components window will appear. Click Next button Click the Install button Setting up the application software Setting up the application software Information Select the USB menu by pressing the UP/ Down Starting PC modeUse the UP and Down buttons to select Cut 101 Removing the USB Driver for Windows 98SE Hardware icon on the task bar Removable DiskRemoving the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACThis software is only compatible with Windows Digimax ViewerUsing PhotoImpression Digimax Reader Recognized as text Digimax ReaderUse a USB cable with the correct specification SpecificationSettings Control Panel System Device Manager Manager Install the camera driver correctlyTab and then click Update Driver or Reinstall Driver USB interface Case When using the USB hubSettings Control 113 Memo 115 6806-2325
Related manuals
Manual 116 pages 48.17 Kb

EC-A400ZSBB/US, EC-A400ZSBA/US, EC-UC501SBB/US, EC-A400ZSBA/E1, EC-A400ZSAA specifications

Samsung has long been a pioneer in the world of consumer electronics, and its vacuum cleaner lineup is no exception. Among the impressive models that have garnered attention are the Samsung EC-UC501SBA/US, EC-A400ZSAA, EC-A400ZSBA/E1, EC-UC501SBB/US, and EC-A400ZSBA/US. These vacuum cleaners are designed to provide superior cleaning efficiency, user convenience, and innovative technology, making them excellent choices for modern households.

The Samsung EC-UC501SBA/US stands out for its powerful suction capability, which is powered by a highly efficient motor. Its lightweight and compact design allow for easy maneuverability throughout the home, while its versatile attachments cater to various cleaning surfaces, from carpets to hardwood floors. One of its notable features is the HEPA filtration system, which captures allergens and fine particles, making it an ideal option for allergy sufferers.

Similarly, the EC-A400ZSAA model is designed with user comfort in mind. It features a lightweight build and ergonomic handle for easy portability. A key technology in this model is its cyclone filtration system, which efficiently separates dust and debris from the airflow, providing sustained suction power without clogging. This ensures a thorough cleaning experience, whether in tight corners or on open floor spaces.

The EC-A400ZSBA/E1 enhances the cleaning experience further with its innovative design and advanced features. Equipped with a multi-surface cleaning head, this vacuum adapts easily to different flooring types, ensuring optimal performance on both carpets and hard floors. The bagless design simplifies maintenance while reducing ongoing costs associated with replacing vacuum bags.

The EC-UC501SBB/US and EC-A400ZSBA/US models share several advanced technologies, including smart sensors that detect dirt levels and adjust suction power accordingly. This intelligent feature not only enhances cleaning efficiency but also conserves battery life. Additionally, these models come equipped with user-friendly interfaces, making operation a breeze for anyone.

Ultimately, the Samsung EC-UC501SBA/US, EC-A400ZSAA, EC-A400ZSBA/E1, EC-UC501SBB/US, and EC-A400ZSBA/US vacuum cleaners exemplify the brand's commitment to innovation and quality. With their powerful suction, advanced filtration systems, and user-centric designs, they provide an effective solution for maintaining a clean and healthy living environment. As technology continues to evolve, Samsung remains at the forefront, ensuring that their vacuum cleaners meet the diverse needs of consumers.
Top Page Image Contents