Samsung EC-A400ZSBB/US manual Starting PC mode, Select the USB menu by pressing the UP/ Down

Page 99

Starting PC mode

If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode".

In this mode, you can download stored images to your PC through the USB cable.

The LCD monitor is always turned off in PC mode.

The camera status lamp will blink when the files are transferring via the USB connection.

Connecting the camera to a PC

1.Turn the PC power on.

2.Turn the camera power on.

3.In any mode other than Voice Recording mode, press

the MENU button.

 

 

 

 

 

 

4. Press the LEFT/ RIGHT button and select the [SETUP]

 

 

SETUP

menu tab.

 

 

 

IMPRINT

 

 

 

 

5. Select the [USB] menu by pressing the UP/ DOWN

 

 

 

 

 

 

BEEP

 

 

COMPUTER

 

button and press the RIGHT button.

 

 

 

 

 

USB

 

 

PRINTER

 

6. Use the UP and DOWN buttons to select

 

BACK:

 

 

SET:OK

 

[COMPUTER], and then press the OK button.

 

 

 

 

 

 

7.Press the menu button twice and the menu will disappear.

8.Connect the PC and the camera via the USB cable.

-Insert the small plug of the USB cable into the camera USB connection terminal.

-Insert the large connector of the USB cable into the USB port of the PC.

-The plugs must be firmly inserted.

If you selected [PRINTER in Step 6, when you connect the camera to your printer, the [CONNECTING…] message will be displayed on the LCD monitor and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 3 and onward.

Disconnecting the camera and PC : Refer to page 104(Removing the removable disk).

INFORMATION

The camera driver must be installed before using PC mode.

When you connect the camera to a computer, you have to use the USB cable supplied with the camera, or the computer can't recognize the camera.

99

Page 98 Page 100
Image 99
Page 98 Page 100
Contents English Instructions Contents Dpof Index Dpof CancelFAQ Dpof Dpof StandardAbout the icons Getting to know your cameraPage An FCC warning AC cord System chartPouch Camera strap SNB-2312Yellow cable Video See p.77 Cant recognize the camera For WindowsIdentification of features Front & TopBack & Bottom Left Mode switchSide / 5-function button FlashText Mode Scene Night PortraitProgram ModeNi-Cd over 1000mAh Alkaline, Ni-Mn, Ni-Zn, LithiumLithium Rechargeable batteries AA typeInsert the batteries taking note of the polarity + Connecting to a Power SourcePolarity + ArrowInstructions on how to use the memory card Fine InformationRemoving the memory card Inserting the memory cardLCD monitor indicator File type AviMJPEG Starting the recording modeISO Press the shutter button once and movie clips areStarting the recording mode Pressing the shutter button down half way Things to Watch Out for When Taking PicturesRecording Still IMAGE, Voice Recording Zoom W/T buttonZoom W/ T button Voice memo / UP button Macro / Down button Focusing Voice memo / UP button~ 80cm 39 ~ 80cm Text Macro / Down button FocusingFocus lock PortraitISO Wide Tele Flash / Left buttonFlash fires regardless of available light Flash mode indicator Icon DescriptionAutomatically Reduction functionSelf-timer / Right button 10SEC self-timerDouble self-timer Menu button MENU/ OK button+/- button White paper Selecting the Night scene Mode LCD button Size Using the LCD monitor to adjust the camera settingsNight Mode Text FireworksSave Effect SepiaSoft LoadHow to use the menu ModeLandscape 2272 2048 1600 1024 640 320 SizeAvi QualitySingle MeteringContinuous shot Multi SpotEffect NormalRGB Photo Frame Vivid SharpnessSub menu Icon Edges of the image are softenedSave / Load the camera configuration Myset Starting play mode Images is the same as the method of playing back voice files Connect the camera to your PCDate 2272X1704 Size F2.9 Aperture value Shutter speedFlash OFF Flash is used100-0009 Thumbnail / Enlargement buttonVoice memo CancelCancels trimming TrimTemporarily stops playback Pause mode Resumes playbackPlay & Pause / Down button Voice memos can’t be recorded onto movie clip filesOK button LCD monitor by pressing the play mode buttonLEFT/ RIGHT/ MENU/ OK button DisplayDelete button Protect ONE PIC Setting up the play back function using the LCD monitorSlide Repeat ResizeMenu tab Main menu Sub menu Secondary menu PrintDpof Print Custom SET ResetPress the OK button to save the configuration Starting the slide showOn selected Rotating an image HorizontalVertical 1536 1200 768 480 ResizeImage Resize Types 2048X 1600X 1024X 640X LogoLock Protecting imagesALL Pics UnprotectedSelecting no Cancels Delete All Deleting all imagesButton and press the OK button Select the Index menu by pressing the UP/ Down Press the LEFT/ Right button and select the Dpof menu tabCurrent picture only RecordingsIf Index is selected Dpof Print SizeLEFT/ Right button Cancels Copy to CardPrinter Setup PictBridgeImages PictBridge Picture Selection Paper PictBridge PrintingStandard Print the pictures storedAUTO, DRAFT, NORMAL, Fine PictBridge Print SettingAuto SET YESPictBridge Reset Setup menu File name Computer PrinterNtsc Down button and press the Right button Auto power offFile name Select the PWR Save menu by pressing the UPSetting Language LanguageSelect the Language menu by pressing the UP Formatting a memory card Setting up the Time Setting up the DateDate & Time will not be imprinted on the image file Date typeImprinting the recording date Imprint type, and then press the OK buttonSelect this if you want to connect the camera to your PC BeepSelecting an External Device USB ComputerSelecting Video out type Quick view InitializationRESET ALLSetting up the Mycam menu Start up imageBeep OFF Select the S.BEEP menu by pressing the UP/ Down Start up soundImportant notes Important notes File Error Before contacting a service centre There is low battery capacity Insert fresh batteriesPlease check the following Camera suddenly stops working while in use Before contacting a service centreCable connection is incorrect Exposure is excessive Reset exposure compensationSpecifications 2048 2048X1536 pixels 1024 1024X768 pixelsApplication Software Notes System RequirementsRecommended About the software Setting up the application software Destination selection window will open. Click Next Click the OK button Frame 8 may not appear according to System requirementsSelect Components window will appear. Click Next button Click the Install button Setting up the application software Setting up the application software Information Starting PC mode Select the USB menu by pressing the UP/ DownUse the UP and Down buttons to select Cut 101 Removing the USB Driver for Windows 98SE Hardware icon on the task bar Removable DiskRemoving the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACThis software is only compatible with Windows Digimax ViewerUsing PhotoImpression Digimax Reader Recognized as text Digimax ReaderUse a USB cable with the correct specification SpecificationUSB interface Case When using the USB hub Manager Install the camera driver correctlySettings Control Panel System Device Manager Tab and then click Update Driver or Reinstall DriverSettings Control 113 Memo 115 6806-2325
Related manuals
Manual 116 pages 48.17 Kb

EC-A400ZSBB/US, EC-A400ZSBA/US, EC-UC501SBB/US, EC-A400ZSBA/E1, EC-A400ZSAA specifications

Samsung has long been a pioneer in the world of consumer electronics, and its vacuum cleaner lineup is no exception. Among the impressive models that have garnered attention are the Samsung EC-UC501SBA/US, EC-A400ZSAA, EC-A400ZSBA/E1, EC-UC501SBB/US, and EC-A400ZSBA/US. These vacuum cleaners are designed to provide superior cleaning efficiency, user convenience, and innovative technology, making them excellent choices for modern households.

The Samsung EC-UC501SBA/US stands out for its powerful suction capability, which is powered by a highly efficient motor. Its lightweight and compact design allow for easy maneuverability throughout the home, while its versatile attachments cater to various cleaning surfaces, from carpets to hardwood floors. One of its notable features is the HEPA filtration system, which captures allergens and fine particles, making it an ideal option for allergy sufferers.

Similarly, the EC-A400ZSAA model is designed with user comfort in mind. It features a lightweight build and ergonomic handle for easy portability. A key technology in this model is its cyclone filtration system, which efficiently separates dust and debris from the airflow, providing sustained suction power without clogging. This ensures a thorough cleaning experience, whether in tight corners or on open floor spaces.

The EC-A400ZSBA/E1 enhances the cleaning experience further with its innovative design and advanced features. Equipped with a multi-surface cleaning head, this vacuum adapts easily to different flooring types, ensuring optimal performance on both carpets and hard floors. The bagless design simplifies maintenance while reducing ongoing costs associated with replacing vacuum bags.

The EC-UC501SBB/US and EC-A400ZSBA/US models share several advanced technologies, including smart sensors that detect dirt levels and adjust suction power accordingly. This intelligent feature not only enhances cleaning efficiency but also conserves battery life. Additionally, these models come equipped with user-friendly interfaces, making operation a breeze for anyone.

Ultimately, the Samsung EC-UC501SBA/US, EC-A400ZSAA, EC-A400ZSBA/E1, EC-UC501SBB/US, and EC-A400ZSBA/US vacuum cleaners exemplify the brand's commitment to innovation and quality. With their powerful suction, advanced filtration systems, and user-centric designs, they provide an effective solution for maintaining a clean and healthy living environment. As technology continues to evolve, Samsung remains at the forefront, ensuring that their vacuum cleaners meet the diverse needs of consumers.
Top Page Image Contents