Adjusting Your Monitor
Menu Display Time
The menu will automatically turn off if no adjustments are made for a certain time period.
You can set the amount of time the menu will wait before it turns off.
1. Push the Menu ( 
) button.
2. Push the - button or + button until the Menu Display Time screen is displayed.
3. Push the Menu ( 
) button to open the Menu Display Time selection screen.
4. Use the - or + buttons to select 5, 10, 20, 50, 200 seconds. 20 seconds is the default value.
Display Mode
| You can see the frequency, the polarity of the operational |
| signals and the resolution level. |
| Note |
31.5KHZ 70HZ NP | These screens do not allow any changes to the settings, |
they are for information only. | |
1024x768 |
|
| 1. Push the Menu ( ) button. |
| 2. Push the - button or + button until the Display Mode |
| screen is displayed. |
14