Samsung EC-A302ZSBA/E1 manual LEFT/ Right button, Cancels Copy to Card, Yes

Page 61

COPY TO CARD

This enables you to copy image files to the memory card.

Copying to the Memory Card

1.Press the play mode button and press the menu button.

2. Select the [COPY TO CARD] menu tab by pressing the

 

 

 

2048

 

 

LEFT/ RIGHT button.

 

 

 

 

 

 

COPY TO CARD

3. Select a desired sub menu by pressing the UP/ DOWN

 

 

 

 

NO

 

 

button and press the OK button.

 

 

YES

 

 

- [NO]

: Cancels "COPY TO CARD".

 

 

 

 

 

 

 

EXIT:MENU

MOVE:

 

- [YES]

: All images saved in the internal memory are

 

 

 

 

 

 

 

 

 

 

 

 

 

copied to the memory card after the [PLEASE

WAIT!] message is displayed. After copying has been completed, the screen will return to play mode.

INFORMATION

When this menu is selected without inserting a memory card, you can't select the [COPY TO CARD] sub menus.

If there is not enough space available in the memory card to copy saved images in the internal memory (16MB), the [COPY TO CARD] command will copy only some of the images and display [CARD FULL!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary images to free up space before inserting the memory card into the camera.

When you move the images that are stored in the internal memory by doing [COPY TO CARD] to the card, 101SSCAM folder will be created in the card to avoid duplication of the sub folder name. Whenever you carry out the [COPY TO CARD] function, the number of SSCAM folder increases. (Ex : 100SSCAM, 101SSCAM, 102SSCAM, 103SSCAM...) After completing [COPY TO CARD], the last stored image of the last copied folder is displayed on the LCD monitor. When you take an image, the image is stored in the last copied folder.

61

Image 61
Contents English Instructions Contents FAQ Dpof CancelDpof Dpof Standard《5》 Getting to know your camera《6》 An FCC warning Pouch Camera strap System chartAC cord SBC-N1 SBC-L1See p.95 ComputerShutter button Flash Self-timer lamp Strap eyelet Lens Identification of featuresFront & Top Back & BottomBattery chamber cover Mode buttonSide/ 5-function button Memory card slotPlay Auto ProgramPortrait Landscape Backlight CR-V3 type Lithium Ion battery Instructions on how to use the power sourcePolarity + Connecting to a Power SourceInstructions on how to use the memory card Super Fine InformationRemoving the memory card Inserting the memory card⑨ ⑩ LCD monitor indicatorISO Starting the recording modeImage quality Press the shutter button to capture an imageImage size 640X480, 320X240 Selectable File type *. Avimjpeg Starting the recording mode《21》 Normal focus mode Things to watch out for when taking picturesUsing the camera buttons to adjust the camera Bar Zoom W/T buttonWide Zoom Digital zoom Wide Stops digital zoomingDown button Voice memo / UP buttonFlash range Focus type Flash / Left buttonAutomatically Flash mode indicator Icon DescriptionReduction function LCD monitor Flash offSelf-timer / Right button MENU/ OK button +/- button 100, 200 Exposure compensation LCD buttonNegative exposure compensation value reduces the exposure Mode Portrait Using the LCD monitor to adjust the camera settingsFine Metering MultiEffect SingleFrame OFF LoadMode How to use the menuBEACH&SNOW 2048 1600 1024 640 320 SizeQuality Still Image mode Movie Clip modeJpeg AviSpot MeteringEffect Continuous shotFine Normal SepiaAvailable photo frames are as follows Photo FrameSharpness Menu and press the right button Press the UP/ Down buttons to select the LoadSlot number to load Saved in the Myset slotFlash OFF SizeDate Starting play mode Images is the same as the method of playing back voice Files Connect the camera to your PC100-0009 Thumbnail / Enlargement buttonCancels trimming CancelVoice memo/ Up button TrimPlay & Pause / Down button Voice memo/ Up buttonVoice memos can’t be recorded onto movie clip files LEFT/ RIGHT/ MENU/ OK button Delete button Cancels Delete ImageSlide Repeat Setting up the play back function using the LCD monitorResize Protect ONE PICPrint Menu tab Main menu Sub menu Secondary menuDpof Print ※ Menus are subject to change without prior notice ResetStarting the slide show Press the OK button to save the configurationOn selected Loading time depends on the image size and qualityHorizontal Rotating an imageVertical Image Resize Types 1600X 1024X 640X ResizeLogo 1200 768 480ALL Pics Protecting imagesUnprotected Lock Deleting all images Selecting no Cancels Delete All Button and press the OK button Press the LEFT/ Right button and select the Dpof menu tab Press the OK button to confirm the settingCurrent picture only RecordingsSelect the Cancel menu by pressing the UP/ Down Setting the Print SizeSelect a desired sub menu by pressing the UP/ Down If Index is selectedLEFT/ Right button Cancels Copy to CardYES PictBridge Printer SetupImages PictBridge Picture Selection Standard PictBridge PrintingPrint the pictures stored in the memory Auto SET PictBridge Print SettingAUTO, DRAFT, NORMAL, Fine AUTO, OFF, onPictBridge Reset Setup menu Computer Printer File name3SEC PicturesFile name Auto power offLanguage Setting LanguageMessage will appear Formatting a memory cardSetting up the Time Setting up the DatePress the LEFT/ Right button and select the Setup Select the Date menu by pressing the UP/ DownImprinting the recording date Date typeImprint type, and then press the OK button Date & Time will not be imprinted on the image fileFrequency BeepSelect the Beep menu by pressing the UP/ Down Button and press the OK button Beep sub menu OFF/ onSelecting an External Device Selecting an External Device USBComputer Select this if you want to connect the camera to your PCQuick view InitializationRESET ALLStart up image Setting up the Mycam menuSelect the S.BEEP menu by pressing the UP/ Down Start up soundImportant notes 《80》 《81》 ㆍThere is low battery capacity → Insert fresh batteries Before contacting a service centrePlease check the following ㆍAn Incorrect focus mode is selected Before contacting a service centre→ Reset the date and time correctly ㆍCable connection is incorrect ㆍExposure is excessive → Reset exposure compensationLCD SpecificationsNi-Zn, 1X CR-V3 Rechargeable battery 2 x AA Ni-MHNi-Cd / 1 x I-PackSBP-1303 System Requirements Software NotesAbout the software Setting up the application software About the application program Frame 8 may not appear according to System requirements Select Components window will appear. Click Next button 《93》 《94》 Any mode other than Voice Recording mode, press Starting PC modeCamera driver must be installed before using PC mode Cut 《97》 Removing the USB Driver for Windows 98SE Removable Disk Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACProperty Digimax ViewerEtc Using PhotoImpression FAQ Win Manager → Universal Serial Bus controllers→ Device Manager → Universal Serial Bus controllers Win XP《106》 《107》 6806-2621