Samsung EC-D330ZSBA/E1 manual Exposure, Selecting the exposure value

Exposure

This camera automatically adjusts the exposure according to the ambient lighting conditions. However, you can select the exposure value by using the [EXPOSURE] sub menu.

In the STILL IMAGE mode, you can select the exposure value.

If you increase the exposure value, the image will be brighter. If you decrease the exposure value, the image will be darker.

Selecting the exposure value

1.Rotate the mode dial to the STILL IMAGE mode and press the MENU button.

2.Press the UP()/ DOWN () button and select [EXPOSURE].

3.Press the SET() button and the sub menu will be displayed.

4.Press the UP()/ DOWN () button and select the desired [EXPOSURE] sub menu.

5.Press the SET() button and the sub menu will be displayed. The default is [0.0EV].

6.Press the MENU button to cancel the menu display.

STILL IMAGE

IMAGE SIZE
QUALITY
WHITE BALANCE	AUTO
EXPOSURE	0.0
EXIT:MENU	CHANGE:

STILL IMAGE

EXPOSURE

+0.0

RECORDING

EXIT:MENUSET:

NOTICE

Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)

This change to the exposure will remain until the camera is switched off. When the camera is turned on again, the exposure compensation setting returns to 0.0EV (discarding the exposure compensation).

When you have selected a change in exposure value, the value is displayed on the LCD. Decreasing or increasing the exposure value may lead to images being under or over exposed (too dark or too bright). Review your images using the LCD monitor to check that they have been successful.

If you change the exposure compensation value in the STILL IMAGE mode, the changed value is also applied to the MOVIE CLIP mode.

43