Samsung EC-D350SABA/E1, EC-D350SABA/US, EC-D350SABA/GB manual Preparation, Connecting to Power

PREPARATION

Connecting to Power

There are two ways in which to provide the camera with power. You can use batteries(AA

Alkaline or CR-V3), or alternatively, you can use an AC Adapter (DC 6V / 2.0A).

Using the batteries

1 Open the battery chamber cover by pushing in the direction of the arrow.

2 Insert the batteries taking note of the polarity (+ / -).

3 To close the battery chamber cover, push it until it clicks.

Reference

This camera will automatically switch off when not in use for a period of time.

We recommend high–capacity ALKALINE batteries (2000mAh) as manganese batteries cannot deliver sufficient power.

Note

Important information about battery usage

Please remove the batteries if the camera will not be used for long periods.

Batteries can lose power over time and are prone to leaking if kept inside the camera.

Low temperatures (below O°C) can affect the performance of the batteries and you may experience reduced battery life.

Batteries will normally recover at normal temperatures. Do not use old and new batteries at the same time.

During extended use of the camera, the camera body may become warm. This is perfectly normal. If you are planning to use this camera for long periods of time, it is advisable to use an AC adapter.

READY