SETTING UP PLAY BACK FUNCTIONS
PROTECT
This is used to protect specific shots from accidental erasing (LOCK).
It also releases images that have been previously protected (UNLOCK).
1.Turn the camera on.
2.Rotate the mode dial to PLAY mode( 
).
3.Press the MENU button to display the menu on the LCD monitor.
4.Press the DOWN button( 
) and select [PROTECT]. At this point, a sub menu will be displayed as shown below.
SLIDE SHOW PROTECT DELETE ALL FORMAT
PLAY 1/2
03SEC UNLOCK NO NO
EXIT : MENU CHANGE : 
The display will show that the image will not be protected.
5. Shift the cursor to the [PROTECT] sub menu by pressing the RIGHT button ( 
)
SLIDE SHOW PROTECT DELETE ALL FORMAT
PLAY 1/2
ONE IMAGE
ALL IMAGES
BACK : 
SET : OK