Samsung EC-A502ZRBA/E1 PictBridge Printing, Standard, Print the pictures stored in the memory

PictBridge: Printing

■Printing Pictures

1.Connect the camera to your printer. The USB menu

must be set to [PRINTER] before you connect the		◀			▶
camera to the printer.(See p.63)			PRINT
2. Use the LEFT and RIGHT buttons to select the [PRINT]
			STANDARD
menu tab.
			INDEX
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.			MOVE: ▼▲	SET:OK
[STANDARD]	: Print the pictures stored in the memory
	card in set numbers. One picture is printed on one piece of paper.
[INDEX]	: Print multiple images on one sheet of paper.

4.The screen shown on the right will appear and the picture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. Press the shutter button while printing to cancel the printing and the [IMAGES] menu is displayed.

※Number of pictures in a index print varies depends on the printer used.

NOW PRINTING

001/001

EXIT:SH

■DPOF PRINT : This allows you to directly print the files with DPOF information.

1.Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer.(See p.63)

2.Use the LEFT and RIGHT buttons to select the [DPOF PRINT] menu tab.

3.Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. [NO] : Cancel the printing

[YES]: Directly print the file with the DPOF information

◀	▶
DPOF PRINT
NO
YES
▲	SET:OK
MOVE: ▼

※Depending on the manufacturer and printer model, some menus may not be available. With a printer without supporting the DPOF, the menu is still displayed but not available.

《65》