Samsung EC-A502ZRBA/E1 Starting PC mode, Camera driver must be installed before using PC mode

Page 95

Starting PC mode

•If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode".

•In this mode, you can download stored images to your PC through the USB cable.

•The LCD monitor is always turned off in PC mode.

•The camera status lamp will blink when the files are transferring via the USB connection.

■Connecting the camera to a PC

1. Turn the PC power on.

 

 

 

 

 

 

 

◀

 

 

▶

2. Turn the camera power on.

 

 

2048

 

 

 

 

3. In any mode other than Voice Recording mode, press

 

 

 

 

 

 

 

SETUP

the MENU button.

 

 

IMPRINT

 

 

 

 

4. Press the LEFT/ RIGHT button and select the [SETUP]

 

 

BEEP

 

 

COMPUTER

 

menu tab.

 

 

USB

 

 

PRINTER

 

 

 

BACK:◀

 

 

SET:OK

 

 

 

 

 

5.Select the [USB] menu by pressing the UP/ DOWN button and press the RIGHT button.

6.Use the UP and DOWN buttons to select [COMPUTER], and then press the OK button.

7.Press the menu button twice and the menu will disappear.

8.Connect the PC and the camera via the USB cable.

-Insert the small plug of the USB cable into the camera USB connection terminal.

-Insert the large connector of the USB cable into the USB port of the PC.

-The plugs must be firmly inserted.

※If you selected [PRINTER] in Step 6, when

you connect the camera to your printer, the [CONNECTING…] message will be displayed on the LCD monitor and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 3 and onward.

■Disconnecting the camera and PC : Refer to page 98(Removing the removable disk).

INFORMATION

●The camera driver must be installed before using PC mode.

《95》

Page 94 Page 96
Image 95
Page 94 Page 96
Contents User’s Manual Instructions Contents Dpof Standard Dpof CancelFAQ DpofAbout the icons Getting to know your camera《6》 An FCC warning SBC-N1 SBC-L1 System chartPouch Camera strap AC cordSee p.95 ComputerBack & Bottom Identification of featuresShutter button Flash Self-timer lamp Strap eyelet Lens Front & TopMemory card slot Mode buttonBattery chamber cover Side / 5-function buttonNight Portrait Landscape Auto ProgramPlay CR-V3 type Lithium Ion battery Instructions on how to use the power sourceInsert the batteries taking note of the polarity + Connecting to a Power SourcePolarity + ArrowInstructions on how to use the memory card Super Fine InformationRemoving the memory card Inserting the memory card⑨ ⑩ LCD monitor indicatorPress the shutter button to capture an image Starting the recording modeStarting the recording mode 《21》 Normal focus mode Things to watch out for when taking picturesTo use the camera again, press any of the camera buttons Using the camera buttons to adjust the cameraStops digital zooming Zoom W/T buttonBar Wide Zoom Digital zoom WideDown button Voice memo / UP buttonFlash range Focus type Flash / Left buttonEye reduction function Flash mode indicator Icon DescriptionAvailable flash mode, by recording mode AutomaticallySelf-timer / Right button MENU/ OK button +/- button 100, 200 Scene menu and press the Right button Exposure compensationLCD button Using the LCD monitor to adjust the camera settings Load SingleEffect OFFMode How to use the menu2560 2048 1600 1024 640 320 SizeAvi Still Image mode Movie Clip modeQuality JpegRegardless of back lighting MeteringGeneral use SpotSepia Continuous shotEffect Fine NormalAvailable photo frames are as follows Photo FrameVivid SharpnessSoft Saved in the Myset slot Press the right buttonSlot number to load Date 2560X1920 Size F3.5 Aperture value Shutter speedFlash OFF Flash is usedStarting play mode Images is the same as the method of playing back voice files Connect the camera to your PC100-0009 Thumbnail / Enlargement buttonTrim CancelCancels trimming Voice memo/ Up buttonVoice memos can’t be recorded onto movie clip files Voice memo/ Up buttonPlay & Pause / Down button LEFT/ RIGHT/ MENU/ OK button Delete button Protect ONE PIC Setting up the play back function using the LCD monitorSlide Repeat ResizeDpof Print Menu tab Main menu Sub menu Secondary menuPrint ※ Menus are subject to change without prior notice ResetCustom SET Loading time depends on the image size and quality Press the OK button to save the configurationStarting the slide show Vertical Rotating an imageHorizontal 1536 1200 768 480 ResizeImage Resize Types 2048X 1600X 1024X 640X LogoLock Protecting imagesALL Pics UnprotectedButton and press the OK button Selecting no Cancels Delete AllDeleting all images ALL menu tabRecordings Press the OK button to confirm the settingPress the LEFT/ Right button and select the Dpof menu tab Current picture onlyIf Index is selected Setting the Print SizeSelect the Cancel menu by pressing the UP/ Down Select a desired sub menu by pressing the UP/ DownYES All images saved in the internal memory are Cancels Copy to CardLEFT/ Right button Images Printer SetupPictBridge PictBridge Picture Selection Print the pictures stored in the memory PictBridge PrintingStandard AUTO, OFF, on PictBridge Print SettingAuto SET AUTO, DRAFT, NORMAL, FinePictBridge Reset Setup menu Press the Menu button File nameUSB Computer Printer 3SECFile name Auto power offIndonisia and Arabic LanguageSelect the Language menu by pressing the UP Button and press the OK button Language sub menuButton and press the OK button If no is selected Formatting a memory cardSelect the Time menu by pressing the UP/ Down Setting up the DateSetting up the Time Select the Date menu by pressing the UP/ DownDate & Time will not be imprinted on the image file Date typeImprinting the recording date Imprint type, and then press the OK buttonSelecting an External Device USB Beep1, 3 SEC InitializationRESET ALLQuick view Quick view function can’t be activatedBeep OFF Setting up the Mycam menuTurned on Setting a Startup Image Start up imageSelect the S.BEEP menu by pressing the UP/ Down Start up soundImportant notes 《80》 《81》 Please check the following Before contacting a service centreㆍThere is low battery capacity → Insert fresh batteries → Reset the date and time correctly Before contacting a service centreㆍAn Incorrect focus mode is selected ㆍCable connection is incorrect ㆍExposure is excessive → Reset exposure compensationLCD Specifications2560 2560x1920 2048 Image Size Primary battery 2xAA alkaline, Lithium, Ni-MnRechargeable battery 2xAA Ni-MH Dimensions WxHxDSystem Requirements Software NotesAbout the software Setting up the application software About the application program Frame 8 may not appear according to System requirements Select Components window will appear. Click Next button 《93》 《94》 Camera driver must be installed before using PC mode Starting PC modeCut 《97》 Removing the USB Driver for Windows 98SE Removable Disk Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACEtc Digimax ViewerProperty Using PhotoImpression FAQ Win XP Manager → Universal Serial Bus controllersWin → Device Manager → Universal Serial Bus controllers《106》 《107》 6806-2751
Related manuals
Manual 108 pages 14.32 Kb Manual 128 pages 17.7 Kb Manual 128 pages 13.25 Kb

EC-A502ZSBA/E1, EC-A502ZRBA/E1, EC-A502ZBBA/E1 specifications

The Samsung EC-A502ZBBA/E1, EC-A502ZRBA/E1, and EC-A502ZSBA/E1 are innovative digital cameras that combine form and functionality, designed to meet the demands of photography enthusiasts and casual users alike. With their user-friendly design and cutting-edge features, these models are perfect for capturing high-quality images in a variety of settings.

One of the standout features of these Samsung cameras is their impressive 16-megapixel sensor, which delivers vibrant and detailed photographs. This sensor, combined with advanced image processing technology, enables users to capture sharp images even in low-light conditions. The cameras support ISO settings that can be adjusted to enhance performance during nighttime photography or in dimly lit environments.

Another key characteristic is the built-in optical zoom lens, which allows for versatility in composition. Users can zoom in on distant subjects without losing image quality, making it easy to capture compelling portraits and landscapes alike. Additionally, the cameras feature a range of scene modes, allowing users to adapt their shooting settings based on the environment, whether it’s a sunny day at the park or an indoor gathering.

The EC-A502 series also emphasizes connectivity, making it easy to share photos with friends and family. With built-in Wi-Fi functionality, users can quickly transfer images to their smartphones and other devices. This feature simplifies the process of sharing photos on social media or with loved ones, enhancing the overall user experience.

Ergonomics and design play a significant role in the appeal of these cameras. The compact and lightweight construction makes them highly portable and perfect for travel. Additionally, the intuitive interface ensures that users can navigate through various settings effortlessly, whether they are seasoned photographers or beginners just getting started.

Ultimately, the Samsung EC-A502ZBBA/E1, EC-A502ZRBA/E1, and EC-A502ZSBA/E1 are excellent choices for anyone looking to enhance their photographic capabilities. With their impressive specifications, user-friendly features, and modern designs, these cameras stand out in the market, delivering quality imagery and ease of use. Whether documenting everyday moments or embarking on photographic adventures, these models provide the tools needed to capture life's best moments beautifully.
Top Page Image Contents